ttps://www.grocerygazette.co.uk/2024/05/14/morrisons-british-pledge/?utm_source=Grocery+Gazette+Subscribers&utm_campaign=6a309afd35-EMAIL_CAMPAIGN_2024_04_11_09_07_COPY_01&utm_medium=email&utm_term=0_-546e01e1d6-[LIST_EMAIL_ID]
More NZ Lamb.
Written by janineadamson from CPM Magazine
The Royal Agricultural Society of England (RASE) and Cenex are undertaking a project to assess the potential for hydrogen to replace fossil fuels on farms.
The work will inform a wider project in which East Coast Hydrogen — a collaboration between...
We have taken on some adjoining grazing land that has no water.
A possibility is pumping from the brook approx 80 m across our existing field to the new field.
There is a slight incline - not steep as this is a brook meadow we're going across.
Would a 2" petrol water pump to an IBC work ?
We...
Apologies if this has been covered before, but I am interested to know if anybody out there (in the UK that is, sorry not trying to alienate anybody else) is genuinely mob-grazing sheep on tall grass or other covers?
It seems that many people are trying it to some degree, but I cannot find...
have to put in quite a few new gateposts (hardwood sleepers) over next few months for 12 and 14ft gates , we usually auger the holes out and concrete in around them , but talking to a fellow farmer he just rams in soil/ stone around his ,recons concrete makes them rot around base (tanalised...
Evening all, this code has just come up on a T7040 Auto Command . It comes up when the ignition is switched on, it stays for a few seconds then goes out. The code isn't in the handbook and I can't find it online. Does anyone know what it could be?
Hi all,
Hoping for some advice on the following, my thanks in advance for timing responding.
Myself and a friend are refurbishing an abandoned T1800. Got it all up and running and really pleased. Next is to get on with some cutting! We don’t have a PGC and they seem pretty expensive. I was...
Hello all, know they have been discussed on here before so that's why I'm asking on here.
What's peoples experiences? Are they a quality product? How do they measure up against the other big brands? Asking because I'm in the market for a AC/DC Tig and I'm doing my research as they are not cheap...
Why do the legalese always have to be so intuitive.
Does this process take a long time mostly or can it go through quickly?
I read an article on right move this one can take ages due to seller having to negotiate between all interested parties until something is settled on.
Is that usually...
I‘m dreaming of treating myself to a decent roller cabinet toolbox for the workshop complete with shiny new tools and cosy little foam trays for them all to sleep in. I’ve got thousands of tools, just fed up moving them between tractors, workshop, sheds etc.
Looking for recommendations for...
Written by Justin Roberts from Agriland
Cereals 2024 is being held in Bedfordshire this year and is little more than a month away, with John Deere being one company that is planning a strong presence at the event.
Visitors to the event are promised their first look at John Deere’s new S7...
Written by Eva Osborne-Sherlock from Agriland
Northern Ireland’s agriculture, environment and rural affairs minister, Andrew Muir, has urged farmers to submit Single Applications ahead of the deadline to avoid late claim penalties.
Single Applications submitted between May 16 and June 10...
Is it just me, or is this possibly the worst online ordering website about? :poop:
Complete pants, long winded and convoluted and crap checksum processing. Support in the site is u/s and then when I try to order over the phone instead, I get the dreaded " Your call is important to us, but no...
If you look on onthemarket and do map view for all wales (at least for 50k and under in the 'entry level' plots I am looking at) it becomes very clear that nearly all available stuff is clustered in the south with only a couple dotted about in mid and north wales.
I was mainly looking at...
If you look on onthemarket and do map view for all wales (at least for 50k and under in the 'entry level' plots I am looking at) it becomes very clear that nearly all available stuff is clustered in the south with only a couple dotted about in mid and north wales.
I was mainly looking at...
Even all
Can someone give me some advice on the welger baler control iii. Post I have found have some different screen displays to mine
I can’t seem to find anything online about them either
I've got around 250tons of silage in a clamp that floor needs attention on. Has anyone had any luck moving silage and re-clamping it?
Would agbag work?
It's a new pit with faulty floor so tarmac company going to resolve. Should I go for compensation on wasted silage?
Good night all. I am looking for a small but important bit of advice if anyone could help. I am the owner of a 148 built in Beauvais for the German Market. I am trying to determine its year of manufacture as it is unregisted..I see that the seriel number stamped onto the skid unit has 7 digits...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.