- Location
- south norfolk, uk
Cure off components made out of carbon fibre.ok I admit it. I dont know what the pressure vessel is used for
Other versions of autoclaves can be used for sterilisation (medical equipment etc)
Cure off components made out of carbon fibre.ok I admit it. I dont know what the pressure vessel is used for
How have you sealed up against the cladding on the left side?
There is a small flashing that butts up to the wood the top gutter is fixed to, with a lip that goes into bottom gutter. There will be a lot of mastic and expanding foam used to seal up the shed as it will be heated to a degree.
They were excellent value for money when I bought one a few years ago. Is that still the case?Roller from P and K Shutters, you just tell them how you are going to fix it and they will come back with a diagram, you have to be fairly accurate especially if you have concrete panels sitting half way across the steel you are fixing the roller to.Fitting is straightforward enough, although having a loadall and scissor lift makes it much easier. I’m on my fifth one so I’m a bit quicker now. The autoclave is not mine, I need to give the owner a nudge as I’d rather it disappeared before harvest.
Autoclave, built in 1964
I’ll get a picture when I get a chance. @Tom8400I was wondering exactly the same thing, Whenever I've contemplated doing something similar I have been put off the idea by the concern of creating a place for water to get in. Unless the portals were going to be the same height and share a gutter so to speak.
Any chance of a picture of where its been sealed up?