Looking for quotes to clad a building from eaves to floor & for a big door.
60ftx30ftx20ft steel framed building
Looking to put a single 100mm thick concrete panel around the bottom (3 sides, 60ft,60ft&30ft)
Then clad from these to the eaves.
Also fit a door in one 30ft end.. roller shutter...
Same here, broken all 36! Waiting on JD to tell dealer what to do, old drill didn't have the tabs so seed tubes worked loose and rubbed on disc unless cable tied.. tab is a good idea but not strong enough when seed pipes vibrating a lot
Same issue here, 35 springs almost too tight to move (even after 1100ha), & one that keeps coming off. Cable tied it for now, but have raised it with dealer
I can assure you it saw one regularly, your welcome to come and look at my machinery to see its all well looked after. Shall I send you the pictures of the rebuild I did? (coulters removed from drill, stripped right down and rebuilt - old bushes re-used at that point as they weren't in need of...
Is there a 'total area drilled' within the ISOBUS menu somewhere? got the daily counters etc but would be interested to see total area drill has covered.. Must be somewhere?
Help to get good slot closure in tricky conditions but mean gutlers run too aggressive in good conditions and push seed out of slot?
Or what problems do they bring?
Is anyone using RID (reduced inner diameter) tyres on the depth wheels on a 750a?
Happy enough with how the drill performs without them but wondering if they might improve it for those difficult parts every field seems to have?
Looking at them they don't seem too badly priced (in USD, and in...
I'm looking for a tractor driver/relief sprayer operator/ GFW to join a contracting business in Bedfordshire.
Follow @mattredmanag on Twitter to find out a bit more about the business..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.