Hmm. Maybe I'll do a video guide. Are you using rtkbase ?Woosh straight over
Hmm. Maybe I'll do a video guide. Are you using rtkbase ?Woosh straight over
Ive signed up will try entering my base on it laterHmm. Maybe I'll do a video guide. Are you using rtkbase ?
Im guessing thats some way to connect base to tractor directly without using a 3rd party castor?Yup, you can do that. Ntrip A and B in rtkbase. Also, with AOG, you can run tailscale on rtkbase and your tablet and connect direct to home securely
Yeah it goes direct - you can still send to centipede/rtk2go as well, it just gives you that ability to bypass them.Im guessing thats some way to connect base to tractor directly without using a 3rd party castor?
I dont mind broadcasting on the likes of rtk2go
I just want no issues when im out in the field
can the base be set up to send to more than 1?? This is my current outputYe
Yeah it goes direct - you can still send to centipede/rtk2go as well, it just gives you that ability to bypass them.
rtkbase can send to 3 - two NTRIP online, and one local.can the base be set up to send to more than 1?? This is my current output
Yes just realised that just changed resolution and sorted it thanksYou’re missing the bottom of the box, it’s off the screen. Try moving it or adjusting screen resolution to see all of it
I get agio crashing and having to reopen it but agopen keeps runningLast few times I started agopen after 30 seconds Agio just seemed to become unresponsive and had to shut down agopen and restart.
The above sometime repeat upon restart.
It will start and work as normal but often after 3 attempts
Any ideas ?
I get agio crashing and having to reopen it but agopen keeps running
Hi, I’m a bit stuck at the moment with my wheel angle sensor(discovery 2 sensor), I’m try to mount it on a John Deere 6430 premium but I’m having trouble trying to find a suitable position for it. I’m now starting to think if it would be easier to buy the factor angle sensor and put that in as they’re only £30. I was just wondering if anyones done it before? and how difficult it would be to add it to the axle and wire it into the system?
Thank you
Sorry a few questions. Could I set up AgOpen GPS to give me a speed signal for a fert spreader or sprayer. I would quite like to occasionally use the sprayer on our NH TM which has no readout plug in the cab.
Also if I was to go down the steering route with the TM could I tap into the steering angle sensor which is fitted for the auto 4wd/diff lock disengage?
Thanks
Finally got it connected this morning with help from @andyinvIve signed up will try entering my base on it later
Hi, I’m a bit stuck at the moment with my wheel angle sensor(discovery 2 sensor), I’m try to mount it on a John Deere 6430 premium but I’m having trouble trying to find a suitable position for it. I’m now starting to think if it would be easier to buy the factor angle sensor and put that in as they’re only £30. I was just wondering if anyones done it before? and how difficult it would be to add it to the axle and wire it into the system?
Thank you