AgOpenGPS RTK Autosteer, How to Guide for £1000

[slvr98svt]

Although I am still working on getting my board figured out(more questions to follow) I would like to get my plumbing finished up. I put a new hydraulic pump on as well as had my orbital valve rebuilt. Everything is mounted but need to have new hoses made and want to make sure I have the hoses routed to the correct positions.

The orbital valve has an "in" "out" "left" and "right" and then the baraki valve looks to have an "S" "T" and "P"

Then the in and out on the pump as well as the steering cylinder.

 

[Andy26]

Although I am still working on getting my board figured out(more questions to follow) I would like to get my plumbing finished up. I put a new hydraulic pump on as well as had my orbital valve rebuilt. Everything is mounted but need to have new hoses made and want to make sure I have the hoses routed to the correct positions.

The orbital valve has an "in" "out" "left" and "right" and then the baraki valve looks to have an "S" "T" and "P"

Then the in and out on the pump as well as the steering cylinder.

• Pressure supply pipe from the tractor pump goes into the 'P' port of the Baraki valve.
• 'T' pipe from Baraki goes into the 'In' of the orbital
• 'Out' from Orbital is return to Tank
• 'Lt' from Orbital goes into one of the 'O' port
• 'Rt' from Orbital goes into the other 'O' port
• 'S' goes to Left steering ram pipe
• The other 'S' goes to the Right steering ram pipe

 

[Rooney]

Struggling with base station, have read the guide and tried to follow as best i could. Antenna up on gable end, wired back to base, powered up, connected up (i think) to enter mount name password etc. Registered with rtk2go on tuesday and email back confirming. Now i cant seem to access base station to check settings and i doesnt appear on rtk2go list yet. Help. Have tried 192.168.4.1 but it just times out before connecting

 

[davidroberts30]

Struggling with base station, have read the guide and tried to follow as best i could. Antenna up on gable end, wired back to base, powered up, connected up (i think) to enter mount name password etc. Registered with rtk2go on tuesday and email back confirming. Now i cant seem to access base station to check settings and i doesnt appear on rtk2go list yet. Help. Have tried 192.168.4.1 but it just times out before connecting

What kit are you using for base

 

[davidroberts30]

Struggling with base station, have read the guide and tried to follow as best i could. Antenna up on gable end, wired back to base, powered up, connected up (i think) to enter mount name password etc. Registered with rtk2go on tuesday and email back confirming. Now i cant seem to access base station to check settings and i doesnt appear on rtk2go list yet. Help. Have tried 192.168.4.1 but it just times out before connecting

Assuming u ising esp32 f9p and wifi 19216841 only works if you connect laptop to esp network

 

[slvr98svt]

• Pressure supply pipe from the tractor pump goes into the 'P' port of the Baraki valve.
• 'T' pipe from Baraki goes into the 'In' of the orbital
• 'Out' from Orbital is return to Tank
• 'Lt' from Orbital goes into one of the 'O' port
• 'Rt' from Orbital goes into the other 'O' port
• 'S' goes to Left steering ram pipe
• The other 'S' goes to the Right steering ram pipe

Great, thank you. I wasn't reading it as the O and S were for both of those fittings. And just to clarify, it doesn't matter which port for S or O as that portion can be swapped if I turn the wheel to the right and the wheels go left without causing any damage.

 

[Rooney]

This is what i have, wifi shows the xbee.

 

[Nigley]

I’m struggling with the guidance, I have a-b line setup for manual guidance and when I turn to go back down field the line shifts half the width so your doing a 50% overlap. As far as I can see all offsets are at zero and on the screen it shows the tool in the centre too. Any ideas must be something simple that I’m not set properly
Thanks in advance

 

[davidroberts30]

Put your details.in that box



Hmm. For some reason i cant attach a pic

 

[del_boy]

@davidroberts30

 

[davidroberts30]

This is what i have, wifi shows the xbee.View attachment 1178465

View attachment 1178516
@davidroberts30

 

[Rooney]

del_boy how do i get that box to come up?? so i can put that in

 

[del_boy]

del_boy how do i get that box to come up?? so i can put that in

You'll have to ask @davidroberts30 im afraid it was his pucture but couldn't post it up so i posted it for him

 

[davidroberts30]

del_boy how do i get that box to come up?? so i can put that in

If your base is on use your laptop to connect to its wifi
Switch that box on (blue switch right sideof the box)

 

[Rooney]

Laptop shows xbee but i cant get it to open up xbee to see photo and blue on off box. Have tried clicking on it etc

 

[Rooney]

Tried using phone and its telling me no internet poor connection quality, the box is within 2 feet of the wifi and we have fibre broadband. Its saying speed of 65 or 75mbps but my computer says broadband is 100Mbps. So could be poor quality connection is stopping me.

 

[davidroberts30]

Laptop shows xbee but i cant get it to open up xbee to see photo and blue on off box. Have tried clicking on it etcView attachment 1178570

Disconnect your house and connect to esp wifi

 

[Rooney]

When you say disconnect house do you mean turn off wifi router or unplug internet?

 

[davidroberts30]

When you say disconnect house do you mean turn off wifi router or unplug internet?

disconect you alhn network then connect to esp network

 

[davidroberts30]

disconect you alhn network then connect to esp network

then type 192.168.4.1 in address bar and you should get the page up