Happy hillbily
Member
- Location
- Uwchaled, North Wales
Needed to get a tempory fence post in to some rock in fill before stacking the round bales, made a hole with the palet forks and used this small stone to get the post in !!!
You absolute animalNeeded to get a tempory fence post in to some rock in fill before stacking the round bales, made a hole with the palet forks and used this small stone to get the post in !!! View attachment 184488
I used to have a wooden block for the shoe to sit on tied to the drawbar so when you had to move the trailer mid-load you didn't have to get off to pick block up, it just followed you.Bale carting with the loadall and trailer the other night, when it got dark couldent see the ring hitch, found some white paint job done !
View attachment 184486
I wasn't given my username, I earnt it !!!!You absolute animal
Next job is to mount 4 bushes and new tines into this old thing for another bale spike, but the bushes arnt long enough to go in the bottom box section and there to big to fit in original bushes, also everything is seized up solid. I feel another bodge coming on
Chop bottom beam off completely and start again?View attachment 184578
Forgot to add picture
if you look at the picture i have another piece of box section that is the right size for the bushes, might just weld that on top of existing box sectionChop bottom beam off completely and start again?
Or will you weld bushes onto top of existing beam?
Bit left over from when made Emma stoolLike the spool handle there
Did you not see it the bearing it sits on came of a stone crusher out of steel works. And some old sprockets an old spanner for foot rest. Weighs a bit. Was a bit high so had to cut 6 links out. Handle was one of bits cut outJeez one heavy duty stool that would be
Didn't use box section in the end as that's more time and money and I have neither, so just boshed her straight on, with a little help from good old angle iron in places View attachment 184980View attachment 184982View attachment 184984
Chop bottom beam off completely and start again?
Or will you weld bushes onto top of existing beam?
Your IW trailer must be stronger than mine. I've plans to mount one on a length of box on the corner.
The best I've seen was on 2 pieces of PTO shaft profile, rock solid.