Ready to go!!!!

[John 1594]

would that be too much for a hydra shift?
there is a 800hp massey tractot puller still driving through a multi power box, but its only 800hp from a 4cyl

dont thin change on the move boxes are allowed under the pulling rules anyway

you start in the gear you intend to finish in, 12 gears on that 16, my choice would either be low 2nd, high 1st or low 3rd, they all direct drive and not using the creep reduction gearset in the front of the box

 

[John 1594]

http://www.ebay.co.uk/itm/John-Deer...prg=20131017132637&rk=1&rkt=4&sd=121412189420

this, with the bomford on the back, and an offset flail topper on the front??????

 

[bobk]

http://www.ebay.co.uk/itm/John-Deere-6610-With-Front-Linkage-And-Pto-Yr-2000/121412189420?_trksid=p2045573.c100033.m2042&_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20131017132637&meid=fba69f9e3704415a807ca6667524dac1&pid=100033&prg=20131017132637&rk=1&rkt=4&sd=121412189420

this, with the bomford on the back, and an offset flail topper on the front??????

And a new set of tyres

 

[John 1594]

And a new set of tyres

tyres are nothing, its the guts inside it what concerns me, id rather have something mechanically sound on bald tyres than a set of new boots but sod all to power them with

 

[bobk]

tyres are nothing, its the guts inside it what concerns me, id rather have something mechanically sound on bald tyres than a set of new boots but sod all to power them with

It'll be grand for drifting john... traction is a factor, that's why they called them tractors

 

[grumpy]

would that be too much for a hydra shift?
there is a 800hp massey tractot puller still driving through a multi power box, but its only 800hp from a 4cyl

reckon ive seen that he dropped a shift and kept going boy how we cheered

 

[robbie]

fookin jessies here is real power

A proper tractor!
And it'll still be going when all the others are gone.

 

[John 1594]

It'll be grand for drifting john... traction is a factor, that's why they called them tractors

anybody can replace tyres

not just anybody can fix a gearbox/rebuild an engine etc etc

 

[grumpy]

anybody can replace tyres

not just anybody can fix a gearbox/rebuild an engine etc etc

where is your tyre story?

 

[mushnt grummmble]

where is your tyre story?

the coach bolts and conveyor belt story?

 

[Mursal]

@spanners Thanks, I'd appreciate any information you have .............

 

[grumpy]

@spanners Thanks, I'd appreciate any information you have .............

err no

 

[Mursal]

A Fendt in drag ...............

 

[davedb]

I dunno what's under that zetor bonnet but the way it downshifts its no crash box must be powershift

 

[mushnt grummmble]

I dunno what's under that zetor bonnet but the way it downshifts its no crash box must be powershift

ehh
its a 2 range 4 non synchro gears with dual power
a good driver will shift it smooth as per video

 

[Will 1594]

dave b are you sure he is down shifting sounds like he is going up them , crystal was ahead of its time when new , used to move range lever round to side of seat in stead of between legs , would love to find a good 12045

 

[ridger]

Good 14145 over here real tidy one

 

[Kevtherev]

I had an 8045 pulled like a train!!

 

[Blue.]

http://www.ebay.co.uk/itm/John-Deere-6610-With-Front-Linkage-And-Pto-Yr-2000/121412189420?_trksid=p2045573.c100033.m2042&_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20131017132637&meid=fba69f9e3704415a807ca6667524dac1&pid=100033&prg=20131017132637&rk=1&rkt=4&sd=121412189420

this, with the bomford on the back, and an offset flail topper on the front??????

The only tractor I regret selling was a very tidy 6800 a 00 or 10 would be a good tractor for you,I'm not a great fan of the vision over the mudguards on my 5150

 

[Kevtherev]

John really would like a nice Valtra!!!