Recent content by @johnwhiteagri

Easter commercials in Lyng they have blast facilities too and do a good job

Wishing you all the very best ☺

You need to take the hose off there is a small tube pushed up inside in order to keep the level up if it's slipped down as can happen it let's the oil run back

Check the little tube hasn't dropped down in the resovior where the pipe goes on it can happen and let's the resovior drain down when the tractor is left

A bit far for us but I'm sure there would be someone closer to you able to do it if you get stuck you could always send it on a pallet to us as a last resort

The machine is basically a powered arbor with forward and backwards powered feed with step control you weld up the hole then bore to size

Pin bosses altered from 65mm down to 60mm

Sounds to me as though the back lash on the diff is incorrectly set or wear on Crown wheel/pinion

7"6' sutton/gurney reeve muck grab shot blasted and repainted new bottom wear strip and all new tines Manitou brackets excellent condition £ 1500 + vat

HARVESTER IS NOW SOLD

Selling on behalf of our customer 1993 Tim harvester 2 row in good working order just lifted 3 acres of fodder beet without problems now surplus to requirements £1650 +vat ono for more information /viewing please call 07979 604350

£300 any good ?

Briggs and scrap em say no more :rolleyes:

Yes it has to be split and depends on model as to where you split

here is an example of the clutch/brake set up on the extrashift model with shiftable pto, if your model is different let me know which one and i will be able to help