- Location
- Snodland kent
Looking at a KV TS for a specific project drilling mainly into unmoved ground. I see they can be fitted with a narrow tungsten point. Are they worth the extra spent?
My research suggests only parts that need changing are the coulter and tine leg. Spring and clamp same part numbers. Was quoted £173 per coulter after discountI can’t tell you about the new tine but you won’t get the standard tine into unmoved ground very well so I’d pay the extra for the narrow time. I’d be interested to know what the extra is if you get a quote? We were looking at getting some spares to covert our 4.8m
Put a link up ? ThanksI found a video on you tube of a Spainish farmer drilling direct with these. It doesn't say whos tines they are though. I'm waiting to speak with Mike Metcalfe if they've a suitable conversion.
View attachment 1160653
Put a link up ? Thanks
So our 4.8m would cost £6500 to upgrade! That’s 2/3 of the total drill value!My research suggests only parts that need changing are the coulter and tine leg. Spring and clamp same part numbers. Was quoted £173 per coulter after discount
Its always expensive to change stuff.So our 4.8m would cost £6500 to upgrade! That’s 2/3 of the total drill value!
Have you spoken to Simon and Team you may find it is possible, have you spoke to fentech agri?Tine spacing of a Weaving doesn’t work for my project. Needs to be based around 500mm which the 125mm TS does.