Evening, had another look tonight where I found in bcu03 on the performance monitor while working the hand brake the monitor started flashing between 110 and 111
I know the first two digits are pedals and the last digit is handbrake but should this flash between 0 and 1 along with beeping while...
evening,
thank you, makes sense. brake light switches both working fine on this one.
tried everything I can think of still no joy.
has anyone got an inkling on the addresses?
this is what in it currently
08.001 switch in fwd off position
08.000 switch in fwd on position
08.010 switch in auto...
evening. sorry for not responding sooner. tested both green 555 and black wires, both have continuity swap coil/solenoid no different. will check green 555 wire with test lamp tomorrow.
still struggling to find the correct addresses to check if there are any that are wrong
thanks
sid
Evening, so I’ve had another look see and what I have is
08.001 switch in fwd off position
08.000 switch in fwd on position
08.010 switch in auto fwd position.
And in
Bcu22 001
With fault code 086 when the switch is switched off.
Does all this seam rite?
the book I have has the page missing...
Morning, excellent thank you. Yes I’ve borrowed a manual from the dealer,
Yes tested solenoid it’s reading 10ohms
Is that ok?
Fwd switch off is 001
Fwd switch on is 000
Auto is 010 these are the readings it has currently.
fault code is 086
It’s the only one.
I’ll check what you say with the...
Evening, had a good chat to a John deere mechanic this afternoon and he thinks the problem maybe an address may have been entered wrongly in the performance monitor bcu addresses recently (prior to me)!
but unfortunately he couldn’t remember what they should be or how to change them I’ve...
Morning, not to familiar with it all if I’m honest, the last part to change. I’m told there’s only one bcu for it and only being the part number being superseded that’s different, will talk to dealer again today to see what difference there is
Thanks
Sid
Evening 12.5v down the orange wires
12.5v to the switch
12.5v going to the bcu
But nothing out the bcu!
Green wire 555B? Good from solenoid to bcu
Could the new bcu be naff aswell??
Sid
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.