Recent content by ballymacombsgrimme

Where do you check the sieve and where are the adjustments carried out. Thanks in advance. I have unthrashed heads in my grain tank. Concave backed off just a tad after we got some split grains in tank. 950 drum speed. Didn't seem to be getting the unthrashed heads in the returns. First cutting...

Hello did you get the belts sold

Thanks forblue. Yes tried the button holding in the correct procedure but it sounds like the ts model didn't have this calibration in its software. You can only adjust the fill times for the pack and not calibrate spring packs in h menu.

Thanks. I have a manual. My ts is a 99 and it didn't have the column shuttle. It doesn't seem to recognise I'm holding both buttons in when trying to get in to calibrate gearbox.

Same issueas you had here no cal coming up. How did you calibrate. I can get into h menus but can't get C1 to do anything either

i seen a kv 2100 for sale the other day. they might be getting past it a bit now mind you, good machine easy pulled

I have been in same position. I ended up buying a dual camera system from China for less than £100. Which has turned out perfect for my harvester.

Yes will be ok. But if it is a 4wd tractor some calculations are required. Rolling circumference is the word. If it's not right your gearbox is gonna hate it

Anyone heard of putting a buck goat in with cattle to prevent tb spread. One guy here swears it works.

Guy I worked with got these injections. Good job but don't plan anything for 24 hours after you get it. The less you do the more localized the injection stays and you get more good out of it. If you work and walk as normal injection gets dispearsed and don't have the same effect. So I'm told.

funny seeing the words government and decision in the same topic. In my opinion if Brexit goes forward as a no deal we will be using WTO rules. I think we could then apply tarrifs as we please. We should at this stage know how much these import tarrifs will be on agri produce coming into the...

Just in from cutting lads. The cutter is still at this go slow nonsense when it warms up. Funny thing today is that it almost refuses to lower (really really slow). Then every now and again it lowers at the speed it should. Has anyone ever got to the bottom of this issue?

rang about that one and i think its not for sale anymore. he was selling for a customer apparently. Would there be many of those about? would they be a good enough machine?

i did have a similar problem years ago where i had a neighbour who rented out the land to a dealer. I ended up with scab and pink eye. Speak to him asap and do not wait too long about it. I would include a dose of an closamectin or dectomax injection on his and yours for scab. my experience...