Bovril's latest activity
-
Bovril replied to the thread Chopping Spring Oat Straw.Last year I chopped a thick winter oat crop with a TX68 (not the best chopper around). Make sure your blades are razor sharp. Min tilled... -
Bovril replied to the thread Manitou rattle, angle gearbox removed..Couldn't leave it, had to have a look. I put the convertor on, pushed down and there is about half a mm play. Maybe enough to rattle...
-
-
Bovril replied to the thread Manitou rattle, angle gearbox removed..Thanks @ACEngineering I looked through filler plug and all teeth look new, as do splines on pump. This makes me think my box is fine. I...
-
Bovril replied to the thread Manitou rattle, angle gearbox removed..Wish it was. Not one click of play in the U/J's
-
Bovril replied to the thread Manitou rattle, angle gearbox removed..Correct level, unknown grade. Was told it was dealer serviced. I've got some genuine oils coming (going to change everything). I'll be...
-
Hi. Got a new to me 737 130 PS at an auction (2017, 2500 hours). Got it home and noticed a loud rattle on idle. Didn't notice before I...
-
-
Bovril replied to the thread JD 6r 215 or Fendt 724 gen 6?.They're both incredibly thirsty when heavy cultivating, and incredibly frugal on lighter work. I wouldn't say there is much in it, but...
-
Bovril replied to the thread JD 6r 215 or Fendt 724 gen 6?.I own both (but the 724 is a 2017, 6215 2022). The John Deere pulls better than the Fendt. The Fendt is far superior in every other aspect.
-
Bovril replied to the thread roll or not.Roll it in the spring. Watch for slugs...
-
Bovril replied to the thread Topping OSR stubbles?.yes. I don't have a rape extension header, so cut as high as I have to to get the stuff in, sometimes just skimming the top off. If it's...
