Recent content by cheggars

Seen someone useing a hydraulic post auger. Made a long pole with alarge disk at the bottem.

One with 5 plus sensors, less and you will catch some flash when welding something awkward.

Just go round the outside and pull the pipe tight, sweep them to hedge 😂😂😂. Ffs.

They always did a car version of the pickup for other markets, even when the trooper was available. Mitsibushi did the same, and did sell that here.

Bit cheaper than the quad on fuel. Much cheaper to run i every other way

We have a Kap jimny on the larger wheels. Brilliant little thing quiet, cheap to Run and repair. Tougher than a Gator/Ranger ours has got 130000 on the clock and only needed a couple of uv joints and king pin bearings. If you dont need the big wheels, stick to road tyres, the steering gets a...

Because its cheaper and they can implement them tomorrow, same exuse being used not to build new bypasses etc.

We had a accident in the next village last week(40mph road). The clock had stopped at 95 , the engine was loose on the road, having hit a wall on both sides of the road and a shop. Driver walked out of it(denying that he was the driver),2 female passengers with life changing injuries. They...

Can you bring the multi carrier back with you. Be very handy with a small lime body on the back on our hills :)

Run away and jackknifed would be my guess

Will any of them put the staple in at a angle. Had a contractor here a few years ago using one. Put the staples in square's I've now got staples popping out as the posts are splitting.

and operter seat sensors that prevent operation. Not such a good safety feature, when it knocks the tractor into neutral on a downhill(when you just lifted your arse off the seat to check something behind)

Its actually their Mid size pickup in the usa, They also make a Smaller 4x4 Pickup for the US market

He doesn't, pays someone to look after the various platforms

Lift it up to high, then bang it into reverse possibly🤔