Recent content by e5c0rt.mk1

That's what the bit that is broken should look like.

Did the same job 2 days ago. Knock the roll pin out, and the end will come off, then knock the shaft out, try and not mushroom the end over or it will get stuck and you'll have to grind the end down. Clean it up and put it back together with some grease.

I cant stand people doing it. Bunch of W⚓'s

This is nearly word perfect to a situation I'm in at the minute except I'm the one who cut it. Cut the grass as the weather forecast said a week of good weather, rained after 2 days, been on the bottom now for 10days but nothing I can do about it. Woman is whinging on everyday that its been...

This ! They way you have it wired at the moment is like putting 2, 12v battery chargers on a 24v vehicle and expecting it to charge to 24v, putting two on is only upping the amperage not the volts.

If the noise goes away with the fan belt off, surely it has to be something that is being driven off the belt. Alternator etc, could even be a problem with the crank pulley.

Sounds like the Neighbour wants laying out. Or a few load of human sh!te on their boundary.

I'm from Durham so in the 208% part of the country and i am desperate for rain, the ground is like concrete and the grass has stopped growing. It hasn't properly rained here for a good month now. I've still got grass to cut but the weather forecast keeps saying we are going to get soaked most...

Had the same problem with a manitou a few years ago the pipe feeding the joystick bust so had no way of lifting the boom. Ended up lifting it up slowly with a block and tackle over a day or two. Got it up enough to get the pipe off.

Been feeding our cows a bale a day, every day since April, either been far to wet, to cold and now far to dry. I never thought I would say it this year but I am desperate for rain. Its been forecast rain on and off for the last month and we haven't had a drop. Got some grass I want to get a...

For a second i thought you were cutting the grass with it aswell.

I know of someone who bought a brand new john deere and had it adapted as he was paralysed from the waist down. It stood him at alot of money after all the alterations were made to it. He only had it about 2 month before he got rid of it as it kept running away on him coming down hills. Not sure...

https://www.haytalk.com/attachments/sledge-roll-service-pdf.33121/ That is a good guide, how to take them apart. They are abit of a nightmare if you haven't done one before.

I got done for driving without due care and attention earlier in the year for overtaking cars that were just sitting behind a motorhome doing 40 in a 60 for about 15 miles. Copper who was behind me said it was dangerous. Ended up having to go on driving retraing course. The fella who ran the...