Recent content by Fearnodeere

You can buy the winders from any supplier,I get mine from McVeighs when I pick up the posts.I knock the posts in by hand which is easy and quick and I put them in 3m apart.

I had a similar experience with mine and the problem was everything had got to dry.A good dose of WD40 sorted it.

The best quote I ever heard regarding luck is,Luck is preparation meeting opportunity.

Had the same problem,it was the elbow above the tank blocked as mentioned by TeaBread.

I only use clipex for barbed wire and have found the best way to strain it is to concrete in steel and use ratchet winders.It takes a bit longer but hopefully I'll never have to do it again.My land is on gravel and I use a bar to make a pilot hole first because if you hit a stone it is nearly...

Browns sledge and grab,£250+vat for the pair.West Berks.

Thanks Dave,I didn't know there is a sensor on the side of the ram I will check it tomorrow.

No,it extends far enough to trip the lock which then holds for a couple of turns and then realeases and it snaps shut.

Once it has released the wrap it won't stay open.

I need a smart switch which is in the clamp and cut unit.Unfortunatly Shelbourne Reynolds don't stock them.

Can anybody please tell me where I can get spares for a parmiter tr86 bale wrapper.