Recent content by geoff570

  1. G

    MX front loader hitch

    Looks like faucheaux brackets to me , not seen one for a long time some measurements would be helpful
  2. G

    Reekie 5254 S Destoner problem

    My bet would be the slip clutch, only give it 1 pump of grease per season, if it’s been greased strip it down and wash out with brake cleaner, for a new one or repair kit ring Steve Thorley or Andrew Scott
  3. G

    Contractor charges

    I meant the driver’s hours that can’t be charged for washing windows ,filling with fuel ,hitching up machine's.
  4. G

    Contractor charges

    Tractor £15 Tyres £1.50 Service/ repairs £4 Insurance £1.50 Driver £15 Total £37 Plus profit @ 20% to cover washing maintenance etc = £44.40 plus fuel and adblue
  5. G

    Trimble GfX750 ez pilot pro available

    Is this still available?
  6. G

    Big square baler ejector

    I always carry half a bale of straw in the chamber then first bale of the day is well formed and the correct length then rebale at the end of the day
  7. G

    Total N on winter oats

    100 units 4 splits
  8. G

    The effects of the virus on machinery dealers.

    Maximum benefit, minimum cost
  9. G

    S Cheers Agri Engineering Ltd

    Yeah good as gold , brought a tractor from them last year [emoji108]
  10. G

    4m folding combi drill /w rear tank

    As far as I know it’s lemkin, lemkin or lemkin. Try Andy Guest he might make one ?‍♂️
  11. G

    Grimme Variant/GZ.

    Go to a GT 170 m there’s plenty around, you will regret buying a GZ after owning a Variant we did , if main web is slipping check the web tensioner the pivot pins will rust solid so even with full tension on the springs it won’t tension the web, hope this helps
  12. G

    Best place to get Rolland blue/green paint

    got mine from here very helpful
  13. G

    auger flights

    JMT Enginering Ladbrook
  14. G

    7530 engine rebuild and improvements :-)

    Because he’s asking the dealer for advice and buying non genuine parts
  15. G

    Price for umbilical spreading

    We charge £95 per hour pumping £45 per hour reeling
Top