HCC's latest activity
-
HHCC replied to the thread Classics Earning their keep..Had some rolling to do this evening, so hooked up a friends MH 744 that I had in the workshop. Perkins P6 sounding sweet pulling the 6t...
-
-
HHCC replied to the thread Idiots guide to Milwaukee......Yes, I had one do the same. Tried jumping it off another battery etc but concluded it was dead
-
HHCC replied to the thread How much water to put in roller.Yes you are right, I have a couple of 8ft ones weighing 3t each. I modified the frame of one of them to be able to use them as a pair...
-
-
HHCC replied to the thread Vintage cultivator wanted.I am really looking for a tined cultivator, but some pics would be good if possible
-
HLooking for a vintage trailed cultivator to use at working days behind my old tractors. Similar to the pic below. Does anyone have one...
-
-
HPlaying with a new toy, today. An hour and a half’s fettling and she was ready for work!
-
HNew toy for me day. Fancied one of these for ages!
-
HHCC replied to the thread Power harrow tine supplier's.Andy Guest is the cheapest for genuine tines in my experience
-
HHCC replied to the thread welger ap630 needle protection.As you have noticed there is no ram stop on the Welgers. Why did the shearbolt break? Are you sure that's what caused the needles to be...
-
HHCC replied to the thread insurance renewal.Another thumbs up for Acres, moved to them this year after they were able to beat the renewal quote from previous insurer. Great, quick...
-
HHCC reacted to workin f nowt's post in the thread Question for farmers with children/youngsters just starting farming etc, etc? with
Like.
Yes agree with that monkey see monkey do. 2 sons both work off farm in agriculture for others. Home should hopefully still be here for... -
HHCC replied to the thread Fergie TED 20 carb problems.Choke will make the mixture more rich so it will run but probably not very well under load if you have limited fuel flow. Another...
-
HHCC replied to the thread Fergie TED 20 carb problems.If it will only run with the choke out, it would indicate a lack of fuel flow to the carb. Perhaps a blocked tap on the bottom of the...
-
HHCC replied to the thread Welger Small Baler.730 is a different animal to a 630, heavier duty frame and no shear bolt on the flywheel. Huge difference in output due to the size of...
-
HHCC replied to the thread Hydraulic gear pullers.I bought this set, used it quite a few times now and very pleased with it...
