Recent content by HDAV

I thought it was a good machine superior to the mf590 however the issues we had were mostly around the brakes the exposed mechanism would get stuck and she got stuck in reverse common issue with selector I would recommend the tractor (in my very limited experience) but not for use on the beach...

Pretty sure cab is factory just not sold to U.K. market tractor is a french built french spec model imported from France recently there are several plates but all are french 🤷‍♂️ I ordered some gas struts from agriline and the 300 series ones fitted the rear but the 600 series didn’t so anyone...

We have tested lanogaurd seems to work really well smells awful use the heavy duty grease spare red all over the underside and the sealer on top so far so good! Over the year they have tried lots of things from galvanised wheels to waxoyl and hammerite

So if any use to anyone with the same cab agriline 300 series gas struts fitted the 600 series didnt front struts I’ll get made/ordered from metrol or SGS

It was a tongue in cheek reply we have 2 590s they work but were rotten before they had touched the sand the 690 cab is much much better condition it’s getting a full paint and the underside lanogaurding to give it the best chance. even the fella I bought it off said it was too good for what...

Hope the ones I ordered from agriline will fit if not will measure the old and get metrol or sgs to make some I have used metrol before on a custom one wasn’t cheap but was much cheaper than an OEM assembly!

Well we sold it last year to a polish buyer who was sending it back to Poland for a refurb looks like he did a hell of a job on her so hopefully back to being productive

Will trade for a clean 590 4wd (with later front axle and ideally 3 stick box) but that’s her future otherwise

Thanks and yes the cab is much better than most of that age which is one reason we went for it. I put it down to where it had come from rather than the type of cab

This is the tractor can just see the frame on the inside of the glass to open the windscreen

So we bought a 690 4wd when we couldn’t find a tidy 590… then found a tidyish 590 So the 690 has been stuffed at the back of the shed for 12 months finally pulled her out to tidier her up a bit before destroying her… any way went to order some new gas struts for the cab and can’t find any for...

If you are over 35 then you aren’t their target demographic

Just seen this on face book

Incentives………

E10 is fine only issue is if you let it stand for long periods 3 months + a rarely used strimmer or chainsaw maybe use super E5-0 regularly used car/bike etc that’s designed for E10 crack on if machine isn’t used over winter for example use stabiliser or E5 for last week or 2