Jetemp's latest activity

  • Jetemp
    Jetemp replied to the thread Best make of mig welder.
    Fronius. Bought a second hand machine a couple of years ago, nothing comes close
  • Jetemp
    Jetemp replied to the thread Cat challenger 765d 2014.
    I hated the decelerator on the road found it bloody dangerous! You used it to slow down coming up to a roundabout, then you needed to...
  • Jetemp
    Jetemp replied to the thread Cat challenger 765d 2014.
    all of the decelerators I’ve had anything to do with you set what revs they drop too and it was like an on off switch. When you got to...
  • Jetemp
    Jetemp replied to the thread Cat challenger 765d 2014.
    Yeh just as a brief run down of my challenger history! 55, 765 A, 875B, 765C, currently on farm a 765E, 775E & a fendt MT943 hope that...
  • Jetemp
    Jetemp replied to the thread Cat challenger 765d 2014.
    Sounds a bit way out to me tbh. surely al the deceleration pedal is is a switch that onice activated cuts the engine revs to those that...
  • Jetemp
    Jetemp replied to the thread Cat challenger 765d 2014.
    How?
  • Jetemp
    Jetemp replied to the thread lime costs.
    120 mile haul isn’t costing £17/tonne! 15 - 16 delivered is about what I reckon it should be.Certainly not substandard and definitely...
  • Jetemp
    Jetemp replied to the thread lime costs.
    is that a spread price or is spreading on top of that! edited just re read your post is appears that you are buying the lime in for...
  • Jetemp
    Jetemp replied to the thread Greasing plough boards.
    Thin wax oil down with a but of standard thinners! Thin enough to go through a paraffin gun. thinners evaporates leaves a nice thin coat...
  • Jetemp
    I never run low lift! Had a bad experience many years blocking the end coulters if I turned sharp with a challlenger On the middle...
  • Jetemp
    What speed do you run your fan at? How times do you drill round the headland? Can you set the sensor at the back to turn the seeder on...
  • Jetemp
    Mixed here but getting better at managing them and I think they are offering quite a lot now. Farmers are always looking for silver...
  • Jetemp
    Jetemp reacted to Classichay's post in the thread Farm jobs with Like Like.
    Think all you’d end up with is your workshop gutted and a lot of people kicking their heels saying it’s too hard and need a sit down...
  • Jetemp
    Jetemp replied to the thread Project Xerion..
    Problem is though it’s a compromise and Pete knows there are better machines for spreadin* lime so he will find every little fault with it!,
  • Jetemp
    Jetemp replied to the thread Project Xerion..
    Artic and low loader! Simple solution restricted o license = no transport manager requirement! Pete’s pretty much as good as I’ve seen...

Forum statistics

Threads
186,612
Messages
4,251,435
Members
46,769
Latest member
Arney
Top