Recent content by jorgenbg

  1. jorgenbg

    CAT TH407C overheating transmission

    What kind of fault codes do you get? I may have same issue.
  2. jorgenbg

    Horsch sprinter keeps blocking

    Great tip regarding the spool. Will try that. We are already on the mower :)
  3. jorgenbg

    Horsch sprinter keeps blocking

    I thought the drill would cope better with less straw on the ground.
  4. jorgenbg

    Horsch sprinter keeps blocking

    haha, does it make any difference? :)
  5. jorgenbg

    Horsch sprinter keeps blocking

    I dont have the machine here, but I think is 200mm base plates. The tine harrows are set to be out of the ground. This year we had a lot of late tillers, so there is a lot of green straw. Not the optimal situation. We are now running a straw chopper to see if it helps. Wonder if other...
  6. jorgenbg

    Horsch sprinter keeps blocking

    Hi Today we tried our Sprinter for the first time, DD into spring oats. We cut the straw as high as possible when combining to minimize the residue issue. With original duetts it works the soil alot and drags up the straw with soil, and then blocks. Any ideas what todo? Another issue with...
  7. jorgenbg

    Starting Stopping a Motor from Arduino

    Chint NS8-25 9-14A overload relay and nc1 3210 contactor
  8. jorgenbg

    Bourgault VOS Horsch Co / Sprinter Conversions

    Its with solid fert. Thanks for the advice. We will try as is!
  9. jorgenbg

    Bourgault VOS Horsch Co / Sprinter Conversions

    Just bought a 3m Horsch Sprinter PPF with original Duetts. Do I have to change points to DD or do the duetts work? I just got a price to change to VOS 4082 at almost 4 400 euros. I think thats a bit much. Only cereals on medium to heavy clay. Winter wheat after spring oats is my first job todo.
  10. jorgenbg

    Upgrading grain plant to PLC controller

    Im building a new grainstore at the moment. I ordered a complete enclosure with PLC from a company which only make electric panels. Its about half price compared to buying it through the dealer of grain store equipment. I just sent the spec of all the motors I need to control and the switches I...
  11. jorgenbg

    CAT TH fault codes

    I need help with code 437 and 941. They come on all the time. CAT changed one sensor, but it did not help. I imported this Machine from the UK and they are not helpfull at all.
  12. jorgenbg

    Sly no till drill

    Thanks for your quick reply. Its between this and an Avatar :)
  13. jorgenbg

    Sly no till drill

    I see these machines often come with two tanks. Is the second tank intended for solid fertilizer?
  14. jorgenbg

    Help with steel frame footings, grain store.

    Regarding the quick clay. Its most likely 10-15m down in the ground. By building this way I avoid very expensive geo-work with drilling test holes all over and lab test the ground etc. Thanks for the kind words. Im not affraid todo things I havent done before. My theory is that most people are...
  15. jorgenbg

    Help with steel frame footings, grain store.

    Hi Thanks for your reply. Been very busy lately. The government did drill out ground samples in the lat 80s or early 90s. Its a bad area when it comes to quick clay. And one greedy farmer took delivery of 65k cubic meters of dirt 2-3 years ago, to make his field bigger. Big mud slide of quick...

Forum statistics

Threads
186,232
Messages
4,241,457
Members
46,652
Latest member
Texel2704
Top