Recent content by Lincsman

Ok if you just about kill everything in the wheeling, but late green heads are a major source of ergot.

On my quote the Red is 4.5p too high after deducting dutys.

Lynx, but i can see both refinerys in the distance!

Derv 103.1 2000L = 123.72 at forecourt Kero 46.9 1000L Gas oil 60.80 5000L For later this week.

Silage was a rare thing in the 1970's around here, it was all hay.

How? its all on the floor a week before the combine goes in?

Straw burning ban, 100% autumn sowing Min till Early drilling (pre Oct) then chemicals reducing effectiveness faster than new ones invented. There were swamped crops before IPU but had less effect in following crops due to the above not being used.

He might say what margin, doing nothing at all might be the least loss.

They were told that the cladding was safe... by the makers of it.. think vw cars that were " clean "

This years weather will be different to last year, so do what suits this year not last year.

Plough now, get it set like concrete, spread beanx on 1st week Nov and lightly power harrow level. Worked every time here but it needs to plough up rough.

Find the corresponding relays and swap them around with other ones, most are identical but check obviously, as a cheap easy start. Is it possible liquid has got into the switches and corroded the contacts?

Ergot drilled at normal depths does not survive.

You are pressing too hard, half pressing lifts ( or lowers) the header to a new float position, (and shows on the screen momentarily) a hard full press switches it to manual.

You power-harrow with a big bow wave to level quickly.