Macleanr's latest activity
-
MMacleanr replied to the thread Huard/MF plough metal.I’m looking for some huard plough parts . Drop a line with details. Thanks
-
MMacleanr replied to the thread Round baler advice for small holding.Actually interested, what sort of age /bale count and £ is it ?
-
MMacleanr replied to the thread Round baler advice for small holding.Exactly, as any farmer knos, the cheapest option is simply to sell up or go and work for minimum wage somewhere and be better of with no...
-
MMacleanr replied to the thread MF5455 handrail work lights.Brilliant, thanks for this.
-
MMacleanr replied to the thread Round baler advice for small holding.Think youv givin me a good answer there . Will defy look out a 235
-
MPerhaps the OP wishes to be independent?
-
MMacleanr replied to the thread Round baler advice for small holding.Would these slats wear quite quickly? I was told yrs back most roller balers were needing major overhauls at 30k bales .Ideally looking...
-
MMacleanr replied to the thread MF5455 wiring loom.Yes, I found exact same, seems to be wiring everywhere for lighting. it’s just some LED spots but had hoped to use existing wiring if...
-
MYep,still a good baler.I would steer clear of an RP200,not their best.An early McHale should be ok,or a Vicon RF135.Older Claas and JD...
-
MMacleanr replied to the thread Round baler advice for small holding.Have a 2.8 Mtr mower conditioner which tbh has been a driver for this as itreally highlighted how inefficient messing about with smaller...
-
MMacleanr replied to the thread Round baler advice for small holding.It’s generally silage I do but occasionally do a few acres of hay which I’m aware can cause slippage on rollers of some machines. The...
-
MMacleanr replied to the thread Round baler advice for small holding.likely 200 a year.
-
MHello there I’m thinking of upgrading an welger rp12 which we have had since 1986 ! It has served us well and apart from the odd fart 💨...
-
MHello there . I’ve a Mf5455 and wanting to add some additional external cab lighting. I’ve noticed there is already unused wiring with...
-
MMacleanr replied to the thread John deere 328a mower conditioner beginner tips.Funny you mention, first mowco I used was a splendimo, it sheared teeeth on end of cross shaft on tractor arms within 15mins of use...
