Recent content by mengeleguru

Kidd 6’ Very well made and fantastic skids.

Heat in the belt is usually caused by slippage. Normal belt tension is 2mm gaps in the tension spring, but you can go up to 4 mm. Above 200 - 230 horse power the belt tends to wear and then snap. The main cause is the pulleys are worn and the belt is starting to sit in the bottom of the...

Morris liquamatic HY The equivalent to original Silkoline Hytrann

To do it perfectly should do it with the engine running. There is a transfer pump in the front gearbox to pump it to the back housing. If it fails or the gauze on it gets blocked it doesn’t transfer the oil. Nothing to do with the transmission filter. If the large gauze in the middle of the...

We have a new Maschio Bisonte 2.8 meter push pull topper in stock. Fantastic quality & build Includes side skids & hydraulic side shift. Only one at old price Please message for best price

Try a Marshall. Very well built & competitively priced too. Well finished off.

To unlatch it pull the lever forwards sharply then physically push it up and the latching pins will sit on a ledge. Reversed the tractor way. The latching pins drop a little bit and when you drive back in the tags on the loader knock the pins off the ledge & lock the loader on. One of the...

Bradley’s Pto Generators Ltd make good units Ireland.

That is correct. The two discs. nearest to the tractor or on the right hand side from the front turn clockwise. So should be fitted with black blades on the first two discs if genuine then alternate red and black finishing with red on the left hand side. Generally should cut anything wet or dry...

Honest & reliable . Will be as described .

Wilcox Transport very good

It is mounted on the bottom links with pins in the balls of the lift arms and cantilever plates under the lift arm links so being able to lift the topper no problem & also float along the ground following the contours. The skids don’t make a mark as they are rounded from left to right & ski...

Its a very good idea as there is no top link to get on the way ,no chains or straps to break or get wedged up and simple to fit. Never had any problems with it yet

Kidd 9 foot topper. Twin rotor adjustable from 1" to 6" Skids dont make a mark as they are ski shaped. Simple and relaible Special offer £2850 plus vat. No top link either. Follows the ground perfectly.