Recent content by Si85

Does anybody know of a contractor or farmer not too far from Gainsborough with either a Mastenbroek p15 or S S engineering md50/md80 jetter? Thanks Simon

£325. Only used twice. Very good condition

I called Acres a week ago for a quote and still waiting to be called back.

Is that a Watkins cultivator you have?

Yes it’s standard. I don’t do a lot of road work but not had a problem yet with kerbs.

One point to look at if it’s all about the tracks is the idler widths. Like one advertised above is on 30inch tracks but the idlers are not full width of track. Compared to a pic of mine which are full width and are also 30inch tracks. personally I prefer full width but that’s my view.

£36/hr for man and tractor, no fuel for AD maize carting.

Some rough measurements

Clifton rubber

Everything looks the same on the diagram apart from 10 instead of a plate been bolted end these have the groove for a circlip and clear dome caps

I don't know what they have come off. I bought them in a sale, got them re-rubbered for a spares without checking the sizes. went to fit one the other week and found out its uses a different size bearing to mine. I can buy the bearings/seals to make it fit but would prefer to keep them all the...

2 x small idler/rollers. Need re-molding. £40

Have 2 quadtrac small idler/rollers available. They have been re-rubbered. £340 each.

I've bought 2 excavators from him in past, was good service

The last time had heating oil from Watson's they wouldn't fill second tank 200m from first because I didn't state 2 drops, so he took it back. I ordered some more 2 days later for 2ppl less so worked in my favour.