Recent content by Thomas5060

Finally some dry weather to get onto the ground, new boots help aswell

Massey haven’t made many updates since about 2006 🤣

John Deere

That’s the best picture I have on the side console, I’m guessing the empty space on the top right is for a combing lever?

Pass, not sure about DB hydraulics, where are the pumps/pump? It’s a commemorative edition if that’s makes a difference

Ours is the twin ram steering, 1390 has the side ram. I seen cheap enough quicke brackets it’s for a 94 series and it’s what got me thinking. Are the hydraulics good for a loader?

Thinking of putting a loader into our 1394 2wd, not for anything to strenuous, lifting some straw, meal, few bags of fert, that kind of thing. Be fine for that? Ive seen people say the front axles of 1394s aren’t suited to loader work, would it be ok for a small work load like that? Would like a...

Only if you leave them ticking over, i normally let them tick over 30 seconds then set them til about 13-1500 revs then go do something else for 5 mins, by that time they are warmed up inside and the gearbox etc is smoother etc

Guessing he was driving behind it?

Haha! In winter it was an exception, start it and use it as quick as possible 🤣

Wouldn’t be an issue for me, always have tractor started and heater on for 5-10 mins before use in cold weather anyway 🤣

Haven’t even had it a year yet, had 11100 hours on it when I bought it and only thought I would do about 200 hours a year with it, I’ve nearly 500 hours put on it. Hoping the 1394 can do some of the smaller jobs and keep hours of it

No not at the moment, usually a digger about to do any loading or unloading. Will probably put a loader on the 110a

You aren’t wrong 🤣

It’s had new tyres since this photo was taken