The angle of the curve can vary depending on your span, rise and radius.
We supply both curved corrugated and curved Box profile to your radius and length required.
We can supply Soudagum in 1kg or 5kg tubs.
We have a contractor that uses it to repair fibre cement or asbestos cracks. He normally uses a wire brush to get the debris from around the area and then paints it on. If the crack is to big he will use a gauze up the length of the crack to give it...
As @designanddetail mentioned, a built up system is the better way to go without the grp. Drip-Stop backed sheeting is really designed for a roof pitch 10° or over.
With a built up system you would be able to do a 100mm build for the price of a 40mm panel.
@Doing it for the kids My apologies for the delay.
Steel Big Six
Steel big six in plastisol Goosewing Grey 0.7mm, 3.050mtr lengths are currently £71.07 + vat per sheet. This is only available in Goosewing Grey as a bespoke coil width is required to give a 1016mm cover width the same as the...
@Doing it for the kids As a budget quote we can offer the below insulated panel prices.
40mm £36.05m²
60mm £40.37m²
80mm £43.88m²
100mm £47.39m²
120mm £50.49m²
150mm £62.30m²
All of the prices are plus vat and delivery, but at least you can budget.
If we do decide to have these in stock there wouldn't be any set up fees for our stock items.
If it was an order manufactured to your lengths and quantities, then yes, there would be a setup charge.
@Doing it for the kids What is your feedback on the sheet lengths?
Thanks @bobk.
We did have these in stock but when the steel prices went up it wasn't cost affective to keep them in stock.
I have thought recently about stocking these again in the below sizes.
4.275mtr
2.900mtr
1.525mtr
The only issue is the price, they would be £21.45 + vat per l/m.
I have listed some details below regarding the different coatings, so if anybody is interested in steel sheeting, you have all the information to browse.
Galvanised Steel
Plain galvanised steel has an expected lifespan of 8 - 12 years, but as most of you will know, galvanised steel can last a...
You can get a few different types of material for foam fillers.
PE is your standard Black / White liquorice coloured filler. These are a cheap and cheerful foam filler but birds and mice do tend to nibble through the filler.
If i remember right, the EPDM filler is a really nice firm filler but...
These are the fixings you would normally use if you are fitting timber to heavy steel.
It has small wings on it to bore a slightly bigger hole through the timber and as it goes into the steel these will break off.
You may need to screw these at 300mm centres along the timber. Normally when you...
We supplied the sheeting for this barn conversion last year.
We supplied HPS Ultra Anthracite for the roof in our 32/1000R crimp curved Box profile and the side cladding is our own in house design metal shiplap facade panels.
The roof was finished off with faceted gable flashings and Lindab...
Sorry for not replying @Steevo, for some reason I haven't been getting notifications and the app kept closing when I try to go onto it.
The main reason the profiles are different is due to repeat custom. If you had a Euroclad 32/167/1000 profile for one roof and then TATA 32/1000 for another...
For a new build roof with timber purlins and box profile sheeting we would recommend a TF45G19 tek screw which will give approximately 40mm embedment into the timber. Our main fix tek screws come with a galvanised washer which has a 2 - 3mm EPDM sealing washer.
The recommended fitment for a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.