Recent content by Tramliner

Page 1500 of Combinable Price Tracker in just over ten years, if you go back and look at page 1,prices haven’t changed. I can’t think of anything that farms purchase that is the same price or less than it was ten years ago?

New Holland stood by and watched Deere improve their CR design, they are trying to catch up now , 3 years to late.

All CR s have had an issues with this if the OSR straw is still green, we’ve had 980s , 9090s and 10.90s ,we found running the rotors faster and breaking the straw more helped.

I wouldn’t have thought the X9 would outperform the 10.90 and 780, but in our experience you don’t get the best out these large combines running them in the same field . Deprecation of the X9 will be as yet unknown, but it’s the first combine we have bought which is worth more apparently after...

I find it quite amusing reading this thread that some posts have strong opinions on machinery that they have no experience. We have run two NH 10.90 s since 2015 and been running NH for over 40 years, the 10.90 is a great combine and I have no complaints about its performance and reliability or...

A penny for your thoughts?

I questioned the depth of the lugs on the tracks compared to the twin tracks, the lugs are closer together on the RX and shallower, l think they have designed them so the lugs don’t stretch too much around the idlers because they are a lot smaller on the RX i do think 40k is too fast for long...

We had a 8RX 410 in August 20, replacing a JD 8345 RT, the RX is a great all round tractor in that it cures a lot of a twin track short comings, it’s a lot more suited to 3 point linkage work and pulls better around corners. Most of its time has been spent pulling Vaderstad 8 m Rapid, 10.3 m...

It better come quick, our 10.90s are turning green with envy!

Plenty of worms here, well there was !!

I was told it is the first one delivered to farm in the UK , maybe Europe.

It’s not just the GPS screens they after now, it’s the main work screens that are permanently fitted to the tractors or sprayers

I have spoken with Ashton farms, after discussion on what we saw on cctv we are convinced the same people did both jobs

How were the doors opened? Ours were all forced , they look ok but you can’t get a key in them now.