Recent content by trigger

hvac is air con,you can take screenshots on the jd screen when they flash up,saves looking through all the trouble codes or getting your phone out👍

we put some slate effect sheets on an old stone building after someone pinched the slates😡looks quite good they came from a company called steadmans just down the road from us👍

sure the one i used to use had two speeds which could be changed from the control box in the cab,put it in the hare and it will fire it all out👍

Yeah its a 2012 single axle with the packer feeder,baled mainly straw and a little hay,the paints flaking a bit on the pickup but other than that it’s a straight tidy baler located near Carlisle

hi possibly have a nh bb9060 for sale,tidy baler but will be up at the top of your budget,just over 60,000 bales

around 40,000 for 1800 model depending on spec

We have a couple at work,good trailers and a lot better than the hispec compacters we also have which are very unstable😭 there fast to unload and great for low buildings

Can’t remember but do you not have to drop the 4wd box off the bottom and knock a roll pin out or take a circlip off😬🤔

hi just after peoples experience of fitting jd greenstar to a fendt profi plus,not really sure how it all works through the fendt,does it run through the fendt screen or do you need a jd screen? is it a fairly straightforward job and any idea on how much it cost? any help much appreciated

take the little square plate with the 4 10mm bolts off on the side of the drop box,the solenoid is in there👍

markate👍

is everything else working? is the boom fully unlocked as nothing will work until this is done

Yes it tells u everything as u are chopping and once the field is finished it will tell u the totals of said field,there’s no way of calibrating for the dm but u should be calibrating for the tonnages as often as is practical

theres a little bronze bush which wears in kidney gearbox,which stops the pawl that engages drive comin out,could be that but i would check basics first

as said above clean with boiling water,used to be a common occurrence on our 850