Currently restoring a 1988 2650 that my father bought new.
Looking an original Grammer seat (the one with the brown upholstery)
I have new base so condition of it would not be important but would like the armrests to be in good nick if possible.
Thanks
Thinking of installing a 15kw 3 phase solar system onto a 16000 bird multi tier free range layer house. Has anyone done similar. I’m in n Ireland so currently no other incentives other than using the electric myself.
as above mtx150 losing power and hard to start injector pump clicking. Put on new filters and removed pipe back to tank blew back down it easily and got diesel sucked back up to filter easily.Anyone any ideas
Have a solis inverter on a 12kw system.
It is giving bother tripping out on a dull morning on start up.
Seems to get going ok on a bright morning anyone know what would cause this??
Rearing calves on a holm & laue computerised feeder.
3-4 week old calves started on 6 litres a day fed in 1 litre doses at 150g/ l
Reared calves many times very successfully on this regime if the calf is not fit for it at the start it usually only takes 4 litres which I don't mind.
Using...
05 mtx150 sitting on diet feeder taking over just stops it's the fuel valve closing . No fuses blown relays seem ok if I touch the fuel valve wire with a live wire it clicks and the tractor will start again as normal. Don't think it is shorting out as no fuses are blown and also it happening...
MTX150 front axle suspension (Carrarro I think) top pin closest to the wheel very hard to pump the grease into has been greased regularly but I noticed the same nipple on both sides becoming very hard to pump the grease into. One side stopped taking it last week have heated it today and it is...
As above what is recommended in this application most oil specifies guide say use original jcb product.
My local spares retailer said 10w oil will do what does anyone think??
Looking to know if anyone has a recommendation for some electronic scales that could be used to weigh the minerals, yeast, limestone , urea etc that you put in the feeder. Ideally would like one that will let you put a bucket on and zero then count up as you add product to the bucket.
Thanks
Just starting to house 6 month old fresian bull calves that I reared. When I bought them as sucks I vaccinated with 2 courses of bovipast and an ibr. What should I do them with now at housing??
Have a bunch of 18 calves around 14 weeks old majority are scouring very watery but well enough formed scour colour green looks normal but smells very rank. The scouring calves are very empty and definitely not thriving 1 down very bad had vet out and put drip in him and took sample for lab...
Currently using Britmilk tip top feeding 6 litres a day at a concentration of 160g/litre to black and white bulls has done a good job on 80% of them but a few still looking a bit weedy. Ready to wean would I be wise to give the backward ones another week or two. What are others experiences of...
As above I was thinking of putting an electric motor onto our 4000 psi when run on 1000 rpm pto to use it stationary for washing machinery etc. What size and speed of motor do I need we have 3 phase electric!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.