Currently got a Sinar Agripro 6095, and to be polite, it's results can be variable.
Just put a new battery in, sampling at exactly same place in heap, just 5 mins difference and the results can be 2% out.
Can trust it, so any recs? Must be portable, not keen on those Prontimeter grinder ones
When job recording such as spraying using Trimble, is there a way for the recording details to automatically go into Greenlight to auto complete spray records?
Getting fed up of multi data entry
I've got an MF 9407S telehandler, that when warm, labours to start, almost as if it has a low battery.
If left for half hour or so it'll start up fine with no hint of labourin.
It did have a new battery less than 12 maths ago as that was what I thought the problem was.
Is there a valve somewhere...
Got a 7620 herr with electric spools and sometimes they work perfectly, sometimes not at all and sometimes they have a mind of their own and do there on thing.
Any solutions to rectify or what should I look at?
I need a couple of replacement spool slices for my MF 6400’s (manual spools), I see the slices are made by Rexroth, has anyone bought these through a Rexroth dealer and we’re they cheaper than going through MF?
My MF 6480 (t3 Perkins) won't start after changing filters.
Refitted filters to check it wasn't sucking air in system, but still won't start.
All fuses ok
Had new injectors 3 years ago, so hopefully they've not failed.
Coming up with error code 678, not sure what that means
Not a problem I’ve come across as any issues have been sorted, but….
If there were a situation with 2 farmers on a muck for straw deal, and the straw has become wet whos job it is to turn it?
Is it that as soon as straw falls out of combine then it’s the livestock farmers responsibility, or...
Been spraying today and had been going fine but on my current load the Arag kept turning the steering axle off, so I thought to do an off/on reboot to see if that cured it.
I turned it off but now won't turn back on again.
I've checked wiring, fuses and connections, all look ok.
I've unplugged...
We've got a silage clamp which is too wide and needs narrowing down, we have some L shaped panels which will do the job. This clamp will only be loaded on 1 side, and about 8ft high.
The plan is to put 2nd silage in the clamp and buckraking would be done with a telehandler (not a big loading...
I’m thinking of putting a Stocks turbojet on my Claydon stubble rake for applying cover crops, grass seed and slug pellets, has anyone mounted one?
If so, how and where did you mount it?
Pics would be appreciated
What battery's should be in a MF 6470 Sisu T3
Currently got a pair of 57233 (096r), 640a, 72Ah batteries in but it turns over slowly, are these the correct ones for this tractor?
Looking to buy a bigger fuel tank, current one is inside a shed, and whilst it’s ok for most thinks, it can get tight when filling tractors with front mounted machinery, and I can’t fill the combine from there (I have to fill bowser, then the combine)
I’m looking to buy a bigger tank bit place...
Just getting a quote to reshoe a tractor and these brands are coming in at 2/3's cheaper than "premium" brands
The tractor is 50 kph & 200 hp and does a mixture of field and roadwork
I see the Ascenso comes with 7 years warranty, is that worth the paper its written on?
Has anyone tried these brands?
Bloke up the road is planning to build a garage, he's digging into the bank and we're having the soil (it's not great though, brick end, etc in it)
He's asked for a price for me to go with tractor and dump trailer.
Not sure what to charge him to be fair
My Pittinger Europrofi wagon is on ring hitch atm, but in tight yards, the rear wheel rubs the drawbar.
Would mounting it on the drawbar give me more manoeuvrability?
The radio in my 7620 needs changing, I was thinking of replacing it with any decent value car radio, however, someone has told me it needs a special feature, something call a d socket (or something like that) as the 7600's have an automatic battery isolator and the radio needs to be compatible...
Which is the best quad mounted pelleter to spread at 24m with electric on/off.
Thinking either Stocks or Bullock/Delimbe, but wondered what the APV ones are like?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.