Has anyone with a 525-60 experienced the Electric Bonnet Extractor Fan continuing to run for Hours after switching the engine off? The fan must either have a Timer or take a Temperature Reading from a sensor that is causing this problem - any help much appreciated
I have been looking around DEFRA web site to learn about PC Certificates - I am I right in understanding all appointments have to be booked through GG via Defra who then appoint a local official to visit site for the inspection - or is there another way to obtain the certificate?
Thanks all
So, a Matbro TR250 year 1995 serial no 58383 - After it warms up it sounds like as if the hydraulics are under pressure but if you turn the steering wheel the noise goes, but also all the hydraulic loader functions go slow - all seems ok when cold though - any suggestions?
Thanks All
Have not sent anything to EU countries since Brexit but a TH going to Eire next week - if the cutmer transport company are collecting, what paper work do I need to prove Export for VAT purposes?
I have an old HDS500Ci that I use only occasionally but last week it sprung a major water leak from behind the fan area, so suspect a seal on the ouput shaft driving the fan etc - not sure if it is repairable but thought I would have a look.
Any ideas how to remove the fan and is the Nut left...
I have an industrial spec 2013 Telehandler with the 109 hp Common Rail Engine - It will not start unles you pull the Electric Plug that pushes on the Common Rail - in front of you as you open the bonnet - remove plug and it starts but will not rev up - push the plug back on while its running and...
A Friend has a TE 20 but I can not find any dash serial no - it has 4 cyl Petrol Engine but the Fuel tap looks like it turns to VO - (nothing connected) - are there any serial numbers hidden or can it be dated from the engine no if I knew where it was - or are there any other identifying parts...
Hi All
Just looking at filling in a V55/5 for an imported tractor - simple 2 wd 40 hp from 1975 - any clues on Wheel Plan, Type of Body - tax class presumably Agric Machine and Heavy OIl - I remember there are only a few boxes to fill - going to be challenging knowing the runs in I have had...
I have a 1975 JD 920S 40 Hp Tractor and have been searching the internet for a Parts Book - or Copy / CD etc - they come up now and then on Ebay USA but with postage import duty, vat etc it is out of the question.- any suggestions? Possibly the 1020S was the same?
Hi all
I have recently bought what was sold to me as a JD 920S - very little info on internet re this Manheim Built Tractor.
What does the S stand for?
Any suggestions where I can get an English Operators Manual
Is there a UK Classic JD Club where more info can be gleaned
Seems very few Peaked...
Can anyone who is currently Importing Used Tractor/Fork Lifts/ General Construction or Farm Machinery From Europe Confirm if any Import Duty is payable?
Thanks
I am reconditioning my AD3.152 engine shortly and would welcome advice on which after market supplier to avoid and which you can recommend for engine overhaul kits.
Thanks
Picked a Wuffler up today for a bit of light work next year - can anyone advise what tyre size would it have been on when new?
Will tidy it up and paint it - are there any Paint Codes for the Yellow and Blue?
Guards are all present - need tidying up a bit and some light metal bashing - any...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.