Started drilling on Monday all good went to re calibrate it on Tuesday as we had changed varieties and the box would turn on and beep to say the fan wasn’t going around although I was sat in a shed as it was wet. It’s a Alpego with a Rds box. Tried on 2 tractors and the same on both
Hi I am struggling to get my head around the headland management system on my puma
Is there a simple auto pto setup where you set the high as you lift the link arms to engage/disengage the pto rather than setting them with time or distance
Any puma users that have the full power shift gearbox what are they like to use for round baler work. Dose it go back to gear 1 when you go from reverse to forward. What are they like to drive? Looking at a 18 reg 1 but never had anything to do with 1
Looking at doing some herbal lay for silage.
to replace grass silage. How many cuts of silage would I expect to get and what tonnage would I get and is it good to fatten cattle
Got a machine with hard to reach grease nipples. Where is the best place to buy the hoses and fittings to route an easy access grease nipple. Like the ones that are on auto lube systems
Having a nightmare with hsbc and thinking of changing banks
They have cancelled a direct debit on a finance agreement
Can’t get through to anyone re a life insurance policy that in would like to change
7 managers in 10 years (only seen 2 of them)
Are they all the same or is there a good 1 to...
Evening got a chance of milling 3 ton of beans for a neighbour. Hammer mill not rolled what price should I be charging for the job. Any ideas appreciated
Evening all
Cattle have been inside and on ad-lib for 5 weeks and just don’t seem to blooming.
they are full hair and are not blooming
They are on barley/wheat soya beans minerals and molasses as well as a ring feeder is silage and 1 straw. Anything I am missing to push them
Any ideas
Hi I have a HARDI lhy that is dropping its pressure when the tank gets 3/4 empty.
I have changed the suction pipe and the pipe from the filter head to the tap/ tap to the pump all o rings as well. Anyone able to shed any light as to what else may be causing this
As above cutting away and the warning light and buzzer started. No oil leaks, plenty of oil in the engine, I took the filter off but that looks clean. Any ideas please
It’s a 430 Lexion p reg with a merc engine in it
Just got the above baler. It has no manual with it but dealer told me to run it with the rear door spool in float position! is this correct as I used to running balers with the spool in neutral
Does anyone know if the above sprayer will work at 18 meters. It has 24 meter booms at present but looking to upgrade as our old HARDI is getting more and more tin worm
Going to look at a Claas variant 360 baler
What’s to look out on them I had a Claas 180 that could make some very good bales so I presume the 360 has some upgrades to it
Thanks Graeme
Our Nixon washer has given up. What to go for now? Cold water only? Another Nixon? What are the mac washers like they look a good machine after looking at them at the Yorkshire show. Any others to look at
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.