Make sure the cables are activating the gear box selectors first had a similar 1st reverse loss,turned out to be a sheared roll pin on a external selector fork also had a small roll pin shear joining the cables in the cable sheath near the end at the gearbox on a 525
Earlier this year brought a fert spreader exactly as described he was a very honest seller could not find any reason not to trust him all his machines looked good
Not sure if these are suitable but I have a vapormatic electric diverter valve as a third service on a loader they do 6 port diverters must be something suitable in the world of hydraulics!
Why not open fully on the scale and calibrate the drill and compare with the chart on the hopper or get the kvernland app mine says 387kgha at 110 on the scale
As all above mine is only 5 meters and 4 ton carrying capacity but can be really useful moving cultivators to wide for the road ,did some reseeding last year managed to get roll cultivator spreader on so only one journey moves combi as well!
There was a rust inhibitor you could get from Ford dealerships with the quantity needed to mix with antifreeze and water not sure if you can still get it ,we use to put it in a 5610 when new it coated the internals grey just carried on with antifreeze after a few years.
Same here they also say they need access to the property to read the meter and I am obstructing them by having a entrance gate,the meter is at the side of the road on the council verge told them this four times and the letters keep coming not been read in six years and I am to blame idiots!
Thanks for the reply my father had an interest in steam all though he collected Fordsons you could always find him watching a ploughing set or a rack saw he would have been 87 this year so he was a youngster when they were in use
There is a o ring on the pto shaft remove cir clip on shaft with tractor lower at the front to keep oil in do not move it with shaft taken out the o ring fits in the casting around the round shaft this sometimes helps but not always front axle hub is a complete strip down
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.