Search results

Evening looking for some advice I bought my MF3125 a couple years ago and it was fitted with 18.4r38 and 13.6r28. Now I know that the fronts are wrong as it’s meant to be 14.9r28. Hence I’m shopping around for new tyres. If however I was to go for wider fronts yet say 16.9r28 would I need to...

Good evening all As part of my restoration project I’m in the process of making a (non original) stainless exhaust for my Massey 3125. However I’m hoping you might be able to help.... I’m trying to understand what the purpose of the feed pipe from the air filter casing that goes into the...

Evening All Been busy cutting and turning hay with my Massey 3125 and have noticed an issue with the rear lift When I operate the lift switch up, the arms lift however they don't go to the top limit. I then have to press the green buttons at the back to get an extra bit of lift. I've sent a...

Afternoon All Latest problem with the Massey 3125 is the dynashift and high/low gear has stopped working. So it won't change through the ranges and the dynashift leds on the dash won't illuminate which would suggest to me that it isn't getting a good earth or power? The alternator is...

Afternoon I'm toying with the idea of buying a 4-5 furrow reversible plough for my Massey 3125 but im very much a novice to ploughing!! We have a 3 furrow KV reversible on the farm but I want to use the power that the 3125 has to offer! I believe the general rule is 25hp per furrow as the land...

Good evening All Making good progress on the overhaul of the Massey 3125, today's job was to replace the 'toggle' switch that the previous owner had installed instead of the green 4wd push button. This system worked however I wanted to return her to her natural beauty. I have purchased a...

Evening All Just bought a Massey 3125 main problem is the rev counter is not working any thoughts on how to rectify it? How is the PTO speed picked up as the datatronic is not too well either. This seems to be a common theme with the 3000 series..... Cheers Gordon