Update. I swapped around the range switch’s I put switch 1 + 2 in 3 + 4s place problem hasn’t happened since so maybe one of the switch’s was sticking and it thought it was in two gears at once.
Still no luck!! Happened again today at slurry tractor was warm fault came back up was stuck in range 3 but showed 1 on the display down beside the shifter. Check resistance of all four solenoids all read similar 11.5 ohms kept driving it eventually went back to normal. Could there be some dirt...
It comes and goes with me but it’s starting to get more frequent now it happens at least once every time I drive it turn it off for a couple of minutes then works away again.
@dee @Glaws lads have ye ever came across error code t1 25 transmission fault won’t change ranges and sometimes won’t move at all checked all the connections on the side of the box seem ok but there’s two block connectors on top of the box one had a small bit of Corrosion and the other had oil...
Did any of ye ever come across Feed All feeders in England friend of mine here in Ireland makes them brilliant feeder.https://www.facebook.com/355704374550042/posts/1952500568203740/
Mine was exactly what @Glaws said it was a tiny filing stuck in the relief valve. But I did come across a lot of oil in the engine Ecu when I was looking for the fault so maybe it’s getting a bad reading worth having a look.
I don’t think a feeder wagon would suit or system for the the amount of stock and the fact we usually only feed silage straight with nothing else mixed through it plus a friend of mine makes feeders and got a loan of one of him last year and it took longer to feed out. Yeah looks in good shape...
I’m only feeding 100 cows and about 30 young stock we have an old teagal straw chopper we use to put out a line of straw first then we just use the bucket of the loader to put down silage on top of it and finally some maize meal. I was wondering would one of them Emily buckets be worth getting...
Has anyone ever been using robots without any service contract, and say stick to what ever software there running, just for example like an iPhone there’s always updated needed but it still works perfectly fine without doing it? Will the robot companies sell you parts if your not in a contract?
No never got around to sorting it yet. Mine is working perfectly only drops if you put on the head lights there was a bad earth on the bulk head on the outside when I went to loosing the nut the wire just pulled out of the connection but that didn’t fix it, also my kill switch was faulty...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.