What about the outlet from this plant - where does that drain to?
If it drains into your ditch you could block that ditch just downstream from the outlet and this will result in the treatment plant failing. You won't have actually interacted with the plant at all so there could be no claim for...
Hi all. Looking to see if anyone has a fert spreader mount for a HiLo (differs from the RB series I think) with the steps and frame around it. I have the bare skid unit and before I get to bodging up a frame (who am I kidding, before I get someone with some skill to make it up) I thought I would...
The FDI Sambrin and 7740 are two machines that punch massivly above their weight and have served us so well over the time we have owned then, which for the loader is 1988 and the 7740 1996. Still the 4000 (1976) and Dexta (19??) are the longest serving units on the farm
@Tucker - we have a Sealey 1.2t changer and would not be without it. It is safe, quick to use, ideal with hydrostatic motors where you need to turn the wheel not the hub to line things up. We use it for large (710/65/R38) duals, combine wheels (800/95/R32) and the sprayer wheels and it is great...
I am an agent and farmer (more agent), and we are governed by strict Rules of Conduct as laid down by the RICS - any chartered surveyor (MRICS FRICS) must abide by the rules laid out by the RICS or they AND their firm can be prosecuted, fined or have letters removed. Many land agents are also...
Clean water tank should be under the main tank, but have never used ours. Our inducation hopper has the push down can cleaner in it. We have a lance to draw in from the 30l cans that hurt my dodgy wrist
Oh and never close the boom with the door open
@will l Which air seat have you got fitted? Most I have looked at would leave my feet dangling in the air
@jamesy
We have a 1993 vintage one of these for 20+ years now and it is a great bit of kit. Run the front in hare and rear in tort when spraying and flick rear to hare for travel. (local...
Ok - thanks for the replies chaps, I think I know far too little about this and the cost is looking too high to "have a go". Will head off the do some proper research.
My thinking had been that the wind nearly always blows but the sun does not always shine (i know solar still works when it is...
Hello all. Apologies for what is quite a noddy post, but I am looking at options for one or two what I call 'farm scale' windturbines - in the 5kw to 10kw range. Go back a few years and they seemed to be everywhere (suffolk and norfolk) - thanks in part to Windcrop putting them up. Now they seem...
Quick question sort of on topic - when setting the temperature slider is it set for the temperature where the moisture meter is measuring, or is it set for the temperature from where the grain for sample has been taken. Obviously these two temperatures can be very very different. A schoolboy...
Resurrecting this thread to spread the joy about Tim Smith.
Smashed the drive cogs on my early 1990's Accord DF1 hopper last night. (think peads, drive wheel turning, fan not running - you get the picture) It is not a standard setup as has some reversers etc in it
Called Tim at 8am and sent...
https://www.carpentergoodwin.co.uk/Products/Air-Suspension-Seats/LGV90C1AR
found this one which looks good value. Will check the recommendations above. Thanks to all
Afternoon all
Can anyone recommend a good, but simple air seat for a NH 7740 ? There seem to be all sorts of options and prices from £480 to to £2480.
The old seat is shot (after 9000 hours) and my back is shot (after a pumb crawl 'incident') so i need more comfort but have to realistic about...
Yes, it was cross dress Tuesday so I was wearing a lovely ankle length woollen number. I do like to salute dad when he goes past, normally with two fingers
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.