kverneland plough

Where can I get the nylon stopper on the depth wheel, have tried making my own out of bit of nylon but broke up quite quickly.

I am looking for a Kverneland PB100 6 furrow, not too concerned about age. ive priced new, for all the bells and whistles on they are looking for about £32k There doesn't seem to be many kicking around 2nd hand, so was wondering how hard would it be to modify a 7/8 furrow down to a 6? - as you...

Does anyone have the rod end (picture) of a Kverneland 160 headstock turnover ram, or the whole ram for sale ??

Hi all, I am after advice on purchasing my first plough. I am looking at buying a 4-5 furrow, reversible with auto resets and variable width (most likely a KV). I am wanting advice on things to check and what to look for when buying a plough second hand. For example, how to check that the...

I want to use my International B275 on my KV match plough. I'm wanting to know how to plumb in the hydraulic spool block. And if the hydraulics would be good enough. I also have a 135 with a weight block on and wondering if it would be easier to set up the hydraulics and would handle the plough...

I am selling a lot of kverneland wearing metal for various models. mainly 8 and 28 but it should fit other models. I have 14" shares left and right handed plenty of them @ £18.50 + £3.50 for point loads of grass knives both left and right @ £7.00 Front Landslides 4 @ 17.50 5 mouldboard stays...