Forums
New posts
Forum list
Search forums
What's new
New posts
New resources
Latest activity
Trending Threads
Resources
Latest reviews
Search resources
FarmTV
Farm Compare
Search
Tokens/Searches
Calendar
Upcoming Events
Members
Registered members
Current visitors
New Resources
New posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Forum list
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More options
Contact us
Close Menu
Forums
Farm Machinery
Workshop Projects
FE35 - 23C Engine rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Vizslaman" data-source="post: 6672197" data-attributes="member: 24802"><p>Well always being up for a challenge I bought a 23C short engine knowing it was seized and had been stood minus head for a good few years.[ATTACH=full]847565[/ATTACH]</p><p></p><p>Unfortunately the position the crank was in when it seized meant I could only access No's 2 & 3 big end bolts[ATTACH=full]847566[/ATTACH]</p><p></p><p>I tried to get a drift into bottom of piston to push piston up the Bore and possibly move piston and liner but sadly no success, so I decided to make some plates that could be welded to the liners and with the aid of my liner puller draw piston and liner out as one as</p><p>one assembly. Unfortunately the liners broke just above the piston so back to the drawing board.[ATTACH=full]847573[/ATTACH]</p></blockquote><p></p>
[QUOTE="Vizslaman, post: 6672197, member: 24802"] Well always being up for a challenge I bought a 23C short engine knowing it was seized and had been stood minus head for a good few years.[ATTACH type="full" alt="847565"]847565[/ATTACH] Unfortunately the position the crank was in when it seized meant I could only access No's 2 & 3 big end bolts[ATTACH type="full" alt="847566"]847566[/ATTACH] I tried to get a drift into bottom of piston to push piston up the Bore and possibly move piston and liner but sadly no success, so I decided to make some plates that could be welded to the liners and with the aid of my liner puller draw piston and liner out as one as one assembly. Unfortunately the liners broke just above the piston so back to the drawing board.[ATTACH type="full" alt="847573"]847573[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Farm Machinery
Workshop Projects
FE35 - 23C Engine rebuild
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top