Hi
Just seen this online http://www.fwi.co.uk/arable/german-no-till-system-provides-pointers-for-uk-growers.htm#.VW9adQHQkA0.twitter
Have had the pleasure of visiting and looking around Thomas Sanders farm and workshop.
Hi
@Robt will probably be able to answer this question better than me but we can get 6k from ours ok just with the standard aerial, but if you make it a permanent fixture with a high gain aerial you should be able to get more especially if you put it on a high spot
Hi
That's a hard one to answer as we don't use auto steer all the time. Last time it was used was back in December and worked ok. It has been serviced and software upgrades since then. We have installed the same versions as what our other Fendt's are running and doesn't cure it, so could say it...
Hi
Still having this issue, replaced steering unit and no difference
Replaced steering joint and made a slight improvement.
Could it be a software issue, or hardware issue I wonder. I wonder if there has been a software upgrade which is not compatible with some other software on the tractor...
Hi David
Nothing like a Cross Slot discussion, there haven't been many on here over the past few months.
1. If David does not consider the Cross Slot as an integral part of his system why does he still run a Cross Slot and why would he continue to buy them, if other drills on the market do the...
Hi guys
Have a fault with our Fendt 936, running Fendt Autosteer with a Topcon RTK correction.
We initially thought it could have been related to the solar storm which we had last night, but today it is no better, and our other tractors running through the same base station are having no...
Hi
Just another thing to add, is that if your are running multiple tractors make sure they use the same back end oil if possible. In the case of separate hyd and Trans oil then if possible change the hyd oil with an utto or similar oil
We run multiple tractors
Hi
As long as your careful then no issue. Have got an MX110 with 13000 hrs on it, only issue we have had was the fwd/Rev clutch pack, due to lots of loader work
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.