80x60x20

H

Hesston4860s

Member

Location

Nr Lincoln

• Dec 14, 2016

• #1

Just out of interest would anyone like to quote for an 80x60x20 painted steelwork only, I would want it ready to take Z purlins.

Paint finish needs to be Massey Ferg vintage grey to match my existing building.

I could build it myself and have priced it up, but if it's not vastly more money I'll just buy it.

Thanks

 

Frank_farmer

Member

Location

Cheshire

• Dec 15, 2016

• #2

what spec have you used to priced a self build ?

 

H

Hesston4860s

Member

Location

Nr Lincoln

• Dec 15, 2016

• #3

Frank_farmer said:

what spec have you used to priced a self build ?

Click to expand...

356x171x45 columns full top bracing with 500x500x15 base plates
254x146x30 rafters with 8 bolt hole 15mm end plates
Wind bracing in front bay only as plan on extending it by 40ft at some point

 

Last edited: Dec 15, 2016

Forever Fendt

Member

Location

Derbyshire

• Dec 16, 2016

• #4

Are you planning on putting side braces in the front bay @Hesston4860s

 

H

Hesston4860s

Member

Location

Nr Lincoln

• Dec 16, 2016

• #5

Forever Fendt said:

Are you planning on putting side braces in the front bay @Hesston4860s

Click to expand...

Yes fully braced in the front bay roof and sides.

 

Forever Fendt

Member

Location

Derbyshire

• Dec 16, 2016

• #6

any photos of the eaves detail on your existing shed

 

H

Hesston4860s

Member

Location

Nr Lincoln

• Dec 18, 2016

• #7

Forever Fendt said:

any photos of the eaves detail on your existing shed

Click to expand...

I have somewhere but can't find it at present, there are pictures on here as well but can't find them either.
I have to take some next time I'm down there.

 

Forever Fendt

Member

Location

Derbyshire

• Dec 20, 2016

• #8

Hesston4860s said:

I have somewhere but can't find it at present, there are pictures on here as well but can't find them either.
I have to take some next time I'm down there.

Click to expand...

I am totally rubbish at looking back for photos on here even my own

 

opininionated

Member

• Dec 27, 2016

• #9

Hesston4860s said:

I have somewhere but can't find it at present, there are pictures on here as well but can't find them either.
I have to take some next time I'm down there.

Click to expand...

Is this it?
https://thefarmingforum.co.uk/index.php?threads/weld-your-own-building.85664/page-7#post-1682926

 

H

Hesston4860s

Member

Location

Nr Lincoln

• Dec 28, 2016

• #10

opininionated said:

Is this it?
https://thefarmingforum.co.uk/index.php?threads/weld-your-own-building.85664/page-7#post-1682926

Click to expand...

Yeah that's it.