I'm impressed that the NH could pull the rolls and power the screen at the same time.
Today at work
- Thread starter Penmoel
- Start date
Hilly
Member
- Location
- Scottish Borders.
- Location
- South Molton
One set of old tyres replaced after 3400 hrs on a loader tractor. Moving the fence for the cows in some bit to far on grass. Dried up nicely over the weekend! No fertiliser for 19 years.
- Location
- North West
Spent most of the day burning diesel and making strips, last of the spring corn ground worked now and the plough not far behind.
Even got the chance at some more land which
is rare round these parts, should get a couple of cuts of grass then into wheat if everything goes to plan [emoji51]
Even got the chance at some more land which
is rare round these parts, should get a couple of cuts of grass then into wheat if everything goes to plan [emoji51]
Another 5000 hours left in those tyres yet
Forever Fendt
Member
- Location
- Derbyshire
Philip Watkins
Member
- Location
- Back in Shropshire
Greenbeast
Member
- Location
- East Sussex
very productive day today, felt good.
postie came with goodies
low points include bleeding my tractor brakes, absolutely ridiculous that the quadrant and part of the cab floor obscure access, on the right, to the bleed nipple, much cursing was done
also wrangling one Jersey boy with a halter (he's not halter trained) and herding the other boy when my OH got home. But the end result is satisfying, they're out on grass
also got the workshop floor compacted
besides this took two girls to abbatoir, went to bearing/seal store for digger bearings and dumper steering seal, cash and carry for essential supplies (rum and coke), supermarket, collected the plate whacker, fitted the new brake feed pipe ahead of bleeding
postie came with goodies
low points include bleeding my tractor brakes, absolutely ridiculous that the quadrant and part of the cab floor obscure access, on the right, to the bleed nipple, much cursing was done
also wrangling one Jersey boy with a halter (he's not halter trained) and herding the other boy when my OH got home. But the end result is satisfying, they're out on grass
also got the workshop floor compacted
besides this took two girls to abbatoir, went to bearing/seal store for digger bearings and dumper steering seal, cash and carry for essential supplies (rum and coke
), supermarket, collected the plate whacker, fitted the new brake feed pipe ahead of bleeding
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
I will wear my snorkel... I'm accustomed to welding rust together....
Make sure you clean the steel
- Location
- Welshpool Powys
Spot of levelling at new garden centre
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
Being indoors when the sun is shining
Some days I'd love to be inside. Today is not one of them days
davidroberts30
Member
- Location
- pembrokeshire
Just what i was thinking
Dave W
Member
- Location
- chesterfield
I hope to have it in use this week!!
I splashed out and bought some steel and hinges today $$$$$
It's even galv
first thing you should do when welding galv is throw it as far down the yard as you can manage.Won't be the joyous occasion your hoping for "welding new steel", if it's galv
Evil hateful stuff. Even when you think you got it spotless it still spits and fecks the welder up
- Location
- Glen Clova, Angus, DD8 4RD
Walked dogs then in the office most of the morning.
Collected 5 extra heifers for the herd from our smallholder friend who's downsizing
Then put his last load of fertiliser on for him. Not a bad view for north Londonshire
Then off to dad's to do his afternoon cattle feed. Back for dinner then getting ready for tomorrow. Guess what we're doing?
Finally, burning the brush from the hedge surgery to clear the way for tomorrow
Collected 5 extra heifers for the herd from our smallholder friend who's downsizing
Then put his last load of fertiliser on for him. Not a bad view for north Londonshire
Then off to dad's to do his afternoon cattle feed. Back for dinner then getting ready for tomorrow. Guess what we're doing?
Finally, burning the brush from the hedge surgery to clear the way for tomorrow
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
Finished a job today
Loaded up and off to the next job
Loaded up and off to the next job
Greenbeast
Member
- Location
- East Sussex
Boothy
Member
- Location
- YO17, North Yorkshire
Finally got some land work done ripping out 40 acres of failed OSR had a demo tractor too cheers RBM must say I'm suitably impressed much better than a 6210r
And also been slinging fert on with the old big dog
And being doing some drain maintenance too
must say I'm suitably impressed much better than a 6210r
And also been slinging fert on with the old big dog
And being doing some drain maintenance too
