What jobs are you doing with your steering system on RTX at the moment?My free subscription to Rangepoint rtx on my Trimble 750 is finishing end of This month,should I go to Egnos for free or pay up to Rangepoint
If your still steering yourself to lights on a screen you wont see any improvement from being on Rangepoint RTX over EGNOS I would think. Get a steering system going in your 7530 and subscribe to RTX again and you will see the benefit.No steering yet,got a John Deere 7530 that’s auto trac ready, Trimble750 is on the sprayer most of the time,can’t steer a straight line so I need some auto steering ,I keep losing my 3 green lights.
A nav controller and vehicle specific harness.What do I need to link my Trimble to my 7530
but why did you do a up grade, you only get what you pay for with GPSSimple way would be spend 3500 ish and you'll pick up a JD steering kit plug I and away you go
We just sold a 3000 Starfire dome on sf1 and an 1800 screen for around that money so they are out there
Only got the sf3 from you because we're staying with 3m drill the sf1 was fine for us but yours was there at the right timebut why did you do a up grade, you only get what you pay for with GPS
There is a full Trimble set up with electric steering wheel on F/B for 3kOnly got the sf3 from you because we're staying with 3m drill the sf1 was fine for us but yours was there at the right time
If we end with 2 drills going at some point 1 of them will still be on sf1
As you say you only get what you pay for and the OP will have paid a fair bit of money and is still only manual guidance so sf1 is a lot better than that and already has a steer ready tractor
Nav 900 Controller/Roof antenna all one unit now. & RTX Sub & away ye go.
Most newish agr tractors (can't actually think of any current tractors that aren't) have all the steering components connected to the vehicles canbus.Yes I have the FM 750.What is ISO/Can based steering.?
It has isobus,as the socket on the back had to be replaced,not sure what it does