Mr always wrong
Member
- Location
- cumbria
It stopped raining momentarily
Today at work
- Thread starter Penmoel
- Start date
- Location
- Near Colchester
Changing the wheels front to back on the little forklift.
They have done over 3500 hours on concrete so far but the fronts were worse than the backs for wear, hopefully get another few hundred hours out of the set now.
They have done over 3500 hours on concrete so far but the fronts were worse than the backs for wear, hopefully get another few hundred hours out of the set now.
- Location
- West Wales
No I’m not quite there (you should have called on though) - that’s Trecenny with spuds under plastic.
my uncle rented 22 acre years ago by Solva for new potatoes and it was 21 fields
How much manipoos do you run at pan mixer towers nowadays
Steevo
Member
- Location
- Gloucestershire
*gasp!*
Surprised the OCD has allowed you to put the CAT 2 at the top of the list.....
Gerbert
Member
- Location
- Dutch biblebelt
If you label the top ones correctly, cat3/2, you can keep them on top
Steevo
Member
- Location
- Gloucestershire
If you label the top ones correctly, cat3/2, you can keep them on top
Or swap them round and make the 3 into a 2 so it reads
Cat 3/3 at top
Cat 3/2 next one down
If it was 3/2 at top and 3/3 below that would be illogical.
(does it show that this is more about my OCD?!)
- Location
- Near Colchester
Just the two, too much to do for one to manage, they do over a thousand hours a year between them.
Yeah i thought CAT 2 was most common and put that at the top maybe it was a mistake to write down the side in Sharpie ?
Ours does about 400 a year
- Location
- pembrokeshire
no im almost next door to your other place
- Location
- Huntingdon
of which 350 of them are on the yard sweeper ? ?
Got to keep things tidy
oldoaktree
Member
- Location
- County Durham
Feeding the sheep this morning.
I’m not to keen on the snow but the dogs seam to like it.
I’m not to keen on the snow but the dogs seam to like it.
Gerbert
Member
- Location
- Dutch biblebelt
Mr always wrong
Member
- Location
- cumbria
Didn't last long
- Location
- Hereford
Starting to put my feed barriers in
What’s going on here? Sand for bedding?