ColinV6
Member
Niiiiice! Isn’t it funny how we get excited by a large barrel on some chunky wheels !!
New toy day
- Thread starter Gedd
- Start date
Niiiiice! Isn’t it funny how we get excited by a large barrel on some chunky wheels !!
Speedstar
Member
- Location
- Scottish Borders
what size , nice looking tractor
- Location
- Wiltshire
Took a year to get the specs right for both Pichon and Fliegle. Then a good 6 months to build. Very pleased. Redlynch did a great job fitting it all together it wasn’t anywhere as easy as we all expected it to be.
Bg
What size is the trailing shoe 12m?
- Location
- Wiltshire
Yes 12m Fliegle Skate. There’s no macerator, sand and macerators being a bad combination. There are augers each side which move the slurry, then reverse and clear the outlets there are hydraulic stone traps each side. Also only about 8 of the pipes bend when it folds so there should be less wear on them. All runs off power beyond. Folds to 2.6m so tidy on the road.
Bg
- Location
- South Wales UK
Brand new PPE Today?
- Location
- Northumberland
Santa has been.
ColinV6
Member
I suffer from the same ailment
You know the insides of these large barrels on wheels are probably just as important but never any pics. Baffles etc you never see too many pics of the inners. Here’s major’s baffle setup looks stronger than most!!
Attachments
I must learn to be a better boy this year...... Has my presents from him does not come up to that standard
Last edited:
puntabrava
Member
- Location
- Wiltshire
Cheers Paul, 724 with some spec still to arrive, they locked out the build two weeks prior to the date I was given.
It does look the part doesn’t itHe’s taken it to the wrong farmer. It’s meant to be for @valtraman
- Location
- northumberland
cornhill depot?
- Location
- Northumberland
Yes. Closest machinery dealer of any brand to us with good service.
- Location
- northumberland
think i might've seen it sitting the other week when passing, just happened to be lunchtime (ish) for a couple of scotch pies from the shop
ColinV6
Member
goldtop
Member
It'll hold more sh1t with both doors on.
- Location
- Northumberland
Must have a hell of a chimney for the old fella to get that down
spanners and hammers
Member
- Location
- cambridgeshire
been a grand dearer if it had wrapping paper over it