- Location
- West Yorkshire
Our 6330 has lost drive it’s come up with the error code EPC524230.03 which reads as proportional solenoid valve for transmission enable stuck in open position. At first I thought there would be a relay gone wrong somewhere but can’t seem to find one relating to the transmission. I then tried to turning the come home relay which shows as active on the screen but the tractor still does not drive so I’m thinking that rules out an electrical fault?
I then took the valve out the bottom of the transmission, there appeared to be some oil running down the electrical connector, I then cleaned it with paraffin, I did notice there seemed to be an O ring missing at the top of the valve so have replaced this but has made no difference. Is there anything else I should check before I order a new valve?
Thanks
I then took the valve out the bottom of the transmission, there appeared to be some oil running down the electrical connector, I then cleaned it with paraffin, I did notice there seemed to be an O ring missing at the top of the valve so have replaced this but has made no difference. Is there anything else I should check before I order a new valve?
Thanks
Last edited: