New toy day
- Thread starter Gedd
- Start date
- Location
- Herefordshire
grainboy
Member
- Location
- Bedfordshire
All very nice, but wouldn’t that drill anyway, ??
Having a play with this tonight.
Will be interesting to watch them behaving naturally in pitch darkness, instead of half of the greedy sods jumping up expecting to be fed when you try to creep in and watch them.
I swear they can hear the sound of wellies being pulled on in the night.
grainboy
Member
- Location
- Bedfordshire
Is that spot the difference
ollie989898
Member
No, he is counting sheep in an attempt to get to sleep.
I agree, looks like an onion bed before the drill arrived. Lovely thing/set up I aspire tobut I would be hoping to go straight after a primary cultivator or plough with it.
It was x beet land ploughed in dec . I hit it 2 days ago with dalbo rolls with paddles, It done a cracking ..
- Location
- Co antrim
Can they not be had with 42 rims
- Location
- Darlington
My Sister has one of the last production RS s and it's 4wdThought they did, wasn't the Focus RS 4wd?
I seem to remember pushing a 4wd Focus out of deep snow once.
Or am I showing my age and lack of knowledge in fast Fords.
- Location
- Herefordshire
Don't think so,I'll ask though.
- Location
- Co antrim
Whats ground clearence like on them?
Jon Boy
Member
- Location
- North Canterbury New Zealand
Replaced the old 750a with a Allen triple disk drill.
Deerefarmer
Member
- Location
- USA
What spacing? I like the overall design,looks well built
Jon Boy
Member
- Location
- North Canterbury New Zealand
5 inch spacing , there is plenty of steel in it its just over 9t its seed /fert with slug pellet applicator on the back and small seed broadcaster on the front there's also a crane on the far side which will lift 1.2t bags. Its our fist triple disk drill depth setting is much simpler but less accurate than a 750a but daily maintenance is a couple mins greasing compared with 30-40 mins every day with 750a . Time will tell if we chose right but so far so good.
icanshootwell
Member
- Location
- Ross-on-wye
Hope yours works better than mine, had it 2 years and struggling to get a picture, i,ve changed cables, and even sent the camera back to be tested, the company i bought it off has no body on the ground to come and test on farm, its all done over the phone.
- Location
- Herefordshire
Pretty Good but not sure how they compare to other makes.
Which supplier's camera did you buy?
I think they are all putting stickers on Chinese cameras, but agree you need backup.
- Location
- Top of the Chilterns
New to me monster harrows.
Fun job coming up. There's only 480 of them...
Fun job coming up. There's only 480 of them...
alomy75
Member
Genuine einbock ones? We used fake ones once and are still finding them everywhere #puncturecity