Recent content by calto

Hi, does anyone know if the loader on this tractor has a separate hydraulic reservoir for the loader? I've just bought it and the loader is jerking like its low on oil but the hydraulic dipstick under seat is showing full.

I had a look for that but I couldn't see it. Access is a lot harder than a 135 because they've welded a bucket to the back so I'm not sure if I'm just not seeing it because I cant get in.

Anyone know how to adjust these brakes?

Thanks for getting back to me, if I can just leave it in a gear I'll do that. I just wanted to check I wasnt missing something.

I've bought an old massey ferguson 3165 industrial loader. It has a shuttle pedal and the usual 2 brake pedals but no clutch. When selecting a gear I'm just pulling the gear stick into gear and it's making a grinding noise. Is this how you operate this tractor? Or is there a clutch I'm missing?

So does it work as well not topping before spraying?

How did your trial go?

Thanks for your advice, I took off all the old wires and rewired it from scratch, took less than an hour and it's running nicely. I tried to upload a video but site wouldn't let me.

???? They're just temporary.

The 2 yellow wires go to a part in the hopper, I think something to agitate the barley and keep it flowing. When the machine was moved the wires were cut at the junction box, they led to a normal handle switch.

There isn't a diagram on the other side unfortunately.

I have a Brooks 3 phase motor running a barley bruiser and I can't work out the wiring. Anyone on here have any advice? I've attached pictures of the motor plate and and of the wires in the junction box that led to the switch.