Recent content by Captain Slack

  1. C

    How much do agricultural machinery sales people get paid

    A good salesman with a good product that is a salesman not an order taker can earn a lot of money. Order takers selling moderate products you would be better off doing something else. Believe me I have seen it all and done a lot of it. Its been a a very interesting career that has covered all...
  2. C

    Packer scrapers

    Ferobide will outlast hardox 500 by 15 times
  3. C

    Weaving sabre tine user thread

    Ferobide could last 15 times hard facing, how much is downtime costing
  4. C

    LD legs for Sumo Quatro

    for a versatile and cost effective solution fit Apm 2007 leg bottoms this gives the option of lo dis post or standard point, the standard point can then be fitted with a 100 mm or 150 mm wing, tungsten is worth the extra money
  5. C

    Lower disturbance subsoiler

    What colour is it?
  6. C

    Lower disturbance subsoiler

    In some soils the sides of the shin wears out when the tungsten is as good as new, using 15x40x4mm tiles placed as in photo 3 solves the problem. check out peckittsferobide.com
  7. C

    Lower disturbance subsoiler

    its a very clever leg offering three different wing widths and various different shin combinations to suit conditions. it is also very good for Ferobide sales.
  8. C

    KV plough metal

    Irispective of where you get your metal from Ferobide is very cost effective on plough shins, skim boards and landslides.
  9. C

    Weaving sabre tine user thread

    Ferobide will probably out last hard facing by ten times
  10. C

    Wearing metal with tungsten what's the alternative

    Morning, if Ferobide is welded as recommended it will chip very rarely.
  11. C

    Trailed Heva Combidisc

    Regarding HP, years ago I did a demo in NZ with a 4.5m sumo Trio, the farmer showed up with 180 HP case . believe it or not Case pulled the trio and I made a sale, however the farmer bought 250 HP to do the job. On difficult land in the UK you would need 500HP to do the same job.
  12. C

    Hardfacing wearing metal

    This sumo subsoiler leg has completed four years since the Ferobide was applied, without Ferobide the legs on this farm had to be refurbished three times a year. I have Ferobide on the shelf ready for dispatch. To discuss your requirements call Stewart Peckitt 07966671669
  13. C

    Subsoiler legs

    These legs are very vulnerable to side leg wear, I have supplied Ferobide to various users with very acceptable results.
  14. C

    Disc and bracket assembly

    Straight discs penetrate far better that wavey
  15. C

    Global Wheat Shortage due to Ukraine War

    Would Dr Sarah Taber put her money where her mouth is, or is she just a keyboard warrior?
See more
Top