classic cutter's latest activity
-
Ive had links also die a week ago or so. Arms are not in need for a few while yet, though getting trailer off would be handy.. Can't... -
The first 590 we had was the basic cab, the deal was to have the heater kit ready to fit at the first service it was 2 months before it...
-
classic cutter reacted to ACEngineering's post in the thread Ideas for Battery Trickle Charge/Maintenance with
Like.
It will be the starter motor causing your problems, replace it with a better one. Let me know details if you want help with this -
What year is the 6270. As mentioned check the wiring and plugs going into the auto3 under the r/h step. The yellow feed wire is prone to...
-
We dealt with Nic for fuel. Howard and Gavin Pell seemed to have grown Chandlers into a big concern now. Got to know Gavin as he was...
-
I was told that when the spikes wear you won't be able to till as deep, when the L shapes blades wear down, you will still be able to...
-
You want a something like a farm force front press on 45 degree rings, not 30 degree or it will sink on your ground, or if your willing...
-
I would call welding an old chassis bodging up. I would call putting a galv chassis on better than any new vehicle
-
I got a Richard's heavy duty chassis a couple of years ago. Very happy with it, I think standard Land Rover are 1.6mm, normal galvanised...
-
classic cutter replied to the thread Radiators.there's a guy next to morrisons whessoe road darlington used him loads of times very straight to deal with and does a first class job he...
-
classic cutter replied to the thread Injector pump solenoid..sorry for the late reply jcb 525 67
-
classic cutter replied to the thread Injector pump solenoid..our did that and it was the starter key switch faulty
-
Not a deffinative guide to the 2000 series as there are always exceptions to the rule but in general. In the UK there was 2620, 2640...
-
classic cutter reacted to Audi90's post in the thread MF 6480 won't start after filter change with Like.
I'm not sure how significant the error code is but I would be tempted to take the air filters out and give it a sniff of easy start...
-
Yup, I have one and use it around the place. It's my main loader/lifter/shifter/crane and does the occasional digging job as well, ha...