DJ-speed's latest activity
-
DDJ-speed replied to the thread High speed gear for hydraulic pump case 885.Basically steering and hydraulics are terrible unless it's got lots of revs, slow to lift, and then not got great lift capabilities...
-
DDJ-speed replied to the thread High speed gear for hydraulic pump case 885.Have about 2000 pso so a little low, manual says should be 2500, don't have flow tester though
-
DDJ-speed replied to the thread High speed gear for hydraulic pump case 885.What would you do to check the mcv and relief valve?
-
DDJ-speed replied to the thread Trima loader joystick problem.You either damaged the switch so it is live permanently or the wires are now shorting together making the 3rd function live, so it...
-
DDJ-speed replied to the thread Quicke loader.I stand corrected.
-
DDJ-speed replied to the thread Case 885 steering wheel spinning.Tried that as I saw it on another thread and no difference
-
DHi, i have a case ih 885 2wd, one of the last 885s, intratrac say it's actually 895 in disguise, But lately the steering wheel spins...
-
DDJ-speed replied to the thread Front-end loader: Quicke - U.S. Brackets.Did these sell?
-
DDJ-speed replied to the thread Quicke loader.I think some models can be UM or US fitting as my 560 is US fitment
-
DDJ-speed replied to the thread What other makes, wheels fit a ford 10 series.480 65 28
-
DDJ-speed replied to the thread What other makes, wheels fit a ford 10 series.Found these and went for it
-
DDJ-speed replied to the thread What other makes, wheels fit a ford 10 series.
-
-
DHi im looking for a loader for my case 885, must have euro 8 cradle fitted, self level would be nice but not essential. Thinking...
-
DI would buy the IH, once you have a loader, you will wonder how you ever managed without one, just because it is 40 years old does not...
-
DDJ-speed replied to the thread Brake shoe suppliers old 80's Woottons grain trailer..Surely that would depend on the trampoline size, and they dont have rings in the end so could fall off, I tried some vapormatic springs...
